Table of Contents
Advertisement
MECHANICAL ADJUSTMENT
When operational problems occur or the mechanism is reassembled, be sure to confirm the following instructions.
1) Make sure that the DATUM HOLE of the CAM GEAR is aligned with the DATUM HOLE in the MAINBASE in the EJECT
mode, as shown in fig.35.
CAM GEAR
F/L RACK
Datum position of front loading rack and cam gear
2) Make sure that part "A" of the RELAY LEVER, when assembled in the CONNECT PLATE, is fully rotated to the left side of
"B" of the MAINBASE, and is touching boss "C" of the MAINBASE, as shown in fig.36.
DATUM HOLE OF CAM GEAR
Fig.35.
Datum position of relay lever and cam gear
Fig.36.
20
DATUM HOLE OF MAIN BASE
Advertisement
Table of Contents
