Table of Contents
Advertisement
DISASSEMBLY OF THE VCR (Cont.)
NOTE
Reassemble the FRONT LOADING MECHANISM in the reverse order. Confirm that the two bosses on the left side of the
CASSETTE HOLDER are inserted into the groove on the left s ide of the top plate. Insert the two bosses on the right side of the
cassette holder into the groove of the FRONT LOADING BRACKET R.(Fig.19).
DRUM ASSEMBLY / EARTH BRACKET ASSEMBLY REMOVAL
1) Remove three screws (1) fixing the DRUM TOTAL ASSEMBLY.
2) Remove the EARTH BRACKET ASSEMBLY (2).
3) Carefully lift the DRUM TOTAL ASSEMBLY (3) from the
DECK MECHANISM, taking care not to damage or touch
the VIDEO HEAD.
NOTE
1) After assembling the DRUM TOTAL ASSEMBLY,
confirm that the tape runs smoothly.
(Refer to ADJUSTMENT OF THE TAPE
TRANSPORTING SYSTEM).
2) When assembling the EARTH BRACKET
ASSEMBLY, a 3x12 screw should be used and
all other parts should use 3x10 screws, as indicated.
TOP PLATE
Assembly of the front loading assembly
Fig.19.
13
INSERT POINTS
Drum total assembly & earth
bracket assembly removal
Fig.20.
Advertisement
Table of Contents
