Baumer HUBNER BERLIN PMG10 Operating Manual page 37

Baumer Hübner
Tools
2.5 mm
n
n
Instruction:
a) Disconnect all electrical connections.
b) Loosen the the coupling on the drive shaft.
Observe the notes in the data sheet and the coupling assembly instructions.
c) Loosen the encoder from the drive's attachment device.
d) Remove the encoder drive's attachment device.
e) Uninstall the attachment device.
f) Remove the coupling from the encoder.
V1 | PMG10 & PMG10P SSI
10 mm
Operating Manual
Disassembly | 7
37