Advertisement
4. Remove Antenna, PCBA, plastic cover plate, and screw using screwdriver (PH#1).
5. Use screwdriver (PH#1) to loosen up 3 screws on the antenna plate, separate Antenna and PCBA.
6. Use screwdriver (PH#1) to loosen up 6 screws on the antenna, remove cable and 2 clips
MF877-00
Page 4
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
MF877-01
Advertisement
