Aztech Shiro HL100E Easy Start page 7

Note: If you cannot find an entry similar to 'TCP/IP' or 'TCP/IP -> Network Adaptor Name' or
'Internet Protocol (TCP/IP)', you must install the TCP/IP protocol. Under Install select
'Protocol' and click Add. In the next dialog box select 'Internet Protocol (TCP/IP)' and confirm
with OK.
3. If you use a router for Internet access, you will still need to configure it, because the router
dials into the Internet, not the computer.
Under Start Settings
and enable the 'Never dial a connection' option. Close the dialogs with OK.
3.1.3 Windows XP
The Windows XP start menu can be configured in different ways. See the Windows XP
documentation for more information.
1. Open the properties of the LAN connection on the connected computers.
Select Start
the right mouse button on the corresponding LAN connection and select 'Properties'.
2. Click the entry for the TCP/IP protocol of the network adaptor and on Properties. Enable
the option 'Obtain an IP address automatically'. You can ignore all other options: they
either remain empty or retain their default settings. Close the dialogs with OK.
Note: If you cannot find an entry similar to 'TCP/IP' or 'TCP/IP -> Network Adaptor Name' or
'Internet Protocol (TCP/IP)', you must install the TCP/IP protocol. Under Install select
'Protocol' and click Add. In the next dialog box select 'Internet Protocol (TCP/IP)' and confirm
with OK.
3. If you use a router for Internet access, you will still need to configure it, because the router
dials into the Internet, not the computer.
Under Start
'Connections' tab and enable the 'Never dial a connection' option. Close the dialogs with
OK.
Note: Other Internet applications such as e-mail clients may also need this information. This
generally involves changing a setting with a name like 'Connect to' or similar to 'LAN'.
Easy Start
Control Panel
Control Panel Network and Internet Connections. Click with
Settings Control/Panel
Page 7 of 15
Network and Dial-up Connections,
Internet Options, select the