Easy Start
Security dialog screen:
All HomePlug devices are shipped using "HomePlug" as a Network Password. The
Security dialog screen allows you to change this Network Password and set your own
private password and apply it to the HomePlug device connected to the computer where the
utility is running.
Click on the Restore Default button to restore the original Network Password "HomePlug"
and apply it locally.
Click on the Set Local button to change the network password locally.
Important Note:
Your private Network Password must have between 4 and 24 characters. The password is
case sensitive. The Network Password can include any letters of the alphabet, numbers or
punctuation marks. Remember the Network Password as it will be needed when adding
other devices to the network later.
Page 13 of 15