Aztech Shiro HL100E Easy Start page 14

Easy Start
Advanced dialog screen:
The Advanced dialog screen allows you to set up a network password remotely on other
HomePlug devices through the powerline.
Type your private network password into the Network Password text box.
The other devices on the network with HomePlug capabilities will have a Security ID/Device
Password printed on the device itself. Find the passwords for all devices you want to manage
and type them one by one into the Device Password text box and Click on the Add button.
This will add the passwords to Remote Passwords text list box and set them to the currently
defined Network Password.
Important Note:
The device must be present on the powerline in order for the password to be confirmed and
added to the Remote Passwords list.
The Status indicates whether each device is successfully set to the Network Password. An
"OK" indicates success while "Fail" indicates a failure.
Click on the Set All button to apply your private network password to all devices that are listed
in the Remote Passwords text list box and to your local device connected to the computer
where the utility is running as well.
Select a password and Hit the Remove button to remove it from the list.
Page 14 of 15