Dukane 6710UL User Manual page 52

NOTE:
• If the lens is shifted to the maximum in the diagonal direction, the screen peripheral area will be dark or shaded.
• Use NP11FL at the home position. If necessary, fine-adjust the position of the projected image using the lens shift function.
• The NP44ML must be fixed to the projector using the separately sold support kit (NP02LK). Loosen the screws of the support bracket,
you can fine-adjustment of the lens shift.
TIP:
• The figure below shows the lens shift adjustment range (projection method: Desktop/Front) of the NP41ZL lens unit. See page 175
for other lens units.
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
50%V
100%V
10%V 10%H
20%H
28
2. Projecting an Image (Basic Operation)
10%H
100%H
20%H
Width of projected
image
Height of projected
image