Dukane 6650HDA User Manual
  1. Manuals
  2. Brands
  3. Dukane Manuals
  4. Projector
  5. 6650HDA
  6. User manual
Dukane 6650HDA User Manual

Dukane 6650HDA User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Projector
6650HDA/6645HDA
6650WA/6645WA
User's Manual
430-6645HDA-6645WA-6650HDA-6650WA-User Manual-00

Advertisement

Table of Contents
loading

Related Manuals for Dukane 6650HDA

Summary of Contents for Dukane 6650HDA

  • Page 1 Projector 6650HDA/6645HDA 6650WA/6645WA User’s Manual 430-6645HDA-6645WA-6650HDA-6650WA-User Manual-00...
  • Page 2 (3) Great care has been taken in the preparation of this user’s manual; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), DUKANE will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.
  • Page 3 Important Information Safety Cautions Precautions Please read this manual carefully before using your Dukane projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.
  • Page 4 Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. RF Interference (for USA only) WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Display Solutions of America, Inc.
  • Page 5 Important Information WARNING • Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap due to the heat emitted from the light output. • Do not place any objects, which are easily affected by heat, in front of the projector lens. Doing so could lead to the object melting from the heat that is emitted from the light output.
  • Page 6 • Do not use new and old batteries together, or use different types of batteries together. • Dispose of used batteries according to your local regulations. Audio Visual Products 2900 Dukane Drive St Charles, IL 60174 Toll-free: 888-245-1966 Fax: 630-584-5156 E-mail: avsales@dukane.com...
  • Page 7 Important Information Note for US Residents The lamp in this product contains mercury. Please dispose according to Local, State or Federal Laws. Lamp Replacement • Use the specified lamp for safety and performance. • To replace the lamp, follow all instructions provided on page 118. •...
  • Page 8 Note: The Dukane models described in this document are manufac- tured by NEC and use the same firmware, software programs, control code, and accessory parts. The equivalent Dukane to NEC models are 6645HDA (NP-P452H), 6645WA (NP-P452W), 6650HDA (NP-P502H), AND 6650WA (NP-P502W).

  • Page 9: Table Of Contents

    Table of Contents Important Information .................... i 1. Introduction ......................1 ❶ What’s in the Box? ......................1 ❷ Introduction to the Projector ...................2 General ........................2 Installation .........................2 Videos ........................2 Network ........................2 Energy-saving ......................3 About this user’s manual ...................3 ❸ Part Names of the Projector ...................4 Front ..........................4 Mounting the lens cap strap ..................4 Rear ..........................5...
  • Page 10 Table of Contents ❺ Preventing the Unauthorized Use of the Projector [SECURITY] ........30 ❻ Viewing 3D Images .......................33 LCD shutter eyeglasses (recommended) ...............33 Steps for viewing 3D images on the projector............33 Troubleshooting on viewing 3D images..............36 4. Using On-Screen Menu .................37 ❶...
  • Page 11 Table of Contents Connecting your document camera ................81 Connecting to a Wired LAN ..................82 Connecting to a Wireless LAN (Optional: NP05LM series) ........83 Connecting to a HDBaseT transmission device (sold commercially) ......86 6. APPS MENU ......................88 ❶ What can you do with the APPS MENU? ..............88 7.

  • Page 12: Introduction

    1. Introduction ❶ What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your projector. Projector Remote control Batteries (AAA ×...

  • Page 13: ❷ Introduction To The Projector

    This section introduces you to your new projector and describes the features and controls. General • Single-chip DLP projector with high resolution and high brightness Model name DMD panel Resolution Aspect ratio 6650HDA/6645HDA 0.65 type 1920 × 1080 pixels 16:9 6650WA/6645WA 0.65 type 1280 × 800 pixels 16:10 •...

  • Page 14: Energy-Saving

    1. Introduction Energy-saving • 0.26 W (100-130 V AC)/0.33 W (200-240 V AC) in standby condition with energy saving technology Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode. NORMAL: 0.26 W (100-130 V AC)/0.33 W (200-240 V AC) NETWORK STANDBY: 2.6 W (100-130 V AC)/2.6 W (200-240 V AC) •...

  • Page 15: ❸ Part Names Of The Projector

    1. Introduction ❸ Part Names of the Projector Front Lens shift dials (Horizontal/Vertical) Lamp cover (→ page 17) (→ page 119) Zoom Lever Remote Sensor (→ page 19) (→ page 9) Wireless LAN cover Lens (→ page 83) Focus Ring (→...

  • Page 16: Rear

    1. Introduction Rear Remote Sensor Indicators (→ page 9) (→ page 6) Controls Connection for cable cover (Left/ (→ page 6) Right) Screw holes (→ page 132) Built-in Security Slot ( Security chain opening Terminals Attach an anti-theft device. (→ page 7) The security chain opening accepts security wires or chains up to 0.18 inch/4.6 mm in diameter.

  • Page 17: Controls/Indicators

    1. Introduction Controls/Indicators (POWER) Button (→ page 12, 24) 2. POWER Indicator (→ page 11, 12, 24, 125) 3. STATUS Indicator (→ page 125) 4. LAMP Indicator (→ page 125) 5. ECO Button (→ page 28) 6. SOURCE Button (→ page 14) 7.

  • Page 18: Terminal Panel Features

    1. Introduction Terminal Panel Features 1. COMPUTER IN/ Component Input Terminal (Mini 14. PC CONTROL [PC CONTROL] Port (D-Sub 9 Pin) D-Sub 15 Pin) (→ page 137) (→ page 75, 79, 81) Use this port to connect a PC or control system. This enables you to control the projector using serial 2.

  • Page 19: ❹ Part Names Of The Remote Control

    1. Introduction ❹ Part Names of the Remote Control 1. Infrared Transmitter 20. EXIT Button (→ page 9) (→ page 37) 21. ▲▼◀▶ Button 2. POWER ON Button (→ page 12) (→ page 37) 3. POWER STANDBY Button 22. ENTER Button (→...

  • Page 20: Battery Installation

    1. Introduction Battery Installation 1. Press firmly and slide the battery 2. Install new batteries (AAA). En- 3. Slip the cover back over the bat- cover off. sure that you have the batteries’ teries until it snaps into place. Do polarity (+/−) aligned correctly.

  • Page 21: Projecting An Image (Basic Operation)

    2. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. ❶ Flow of Projecting an Image Step 1 • Connecting your computer / Connecting the power cord (→ page 11) Step 2 •...

  • Page 22: ❷ Connecting Your Computer/Connecting The Power Cord

    2. Projecting an Image (Basic Operation) ❷ Connecting Your Computer/Connecting the Power Cord 1. Connect your computer to the projector. This section will show you a basic connection to a computer. For information about other connections, see “5. Installation and Connections” on page 69. Connect the computer cable (VGA) between the projector’s COMPUTER IN terminal and the computer’s port (mini D-Sub 15 Pin).

  • Page 23: ❸ Turning On The Projector

    2. Projecting an Image (Basic Operation) ❸ Turning on the Projector 1. Remove the lens cap. With the lens cap’s stopper pressed up, pull forward and off. Stopper 2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control. The POWER indicator lights blue and the image is projected on the screen.

  • Page 24: Note On Startup Screen (Menu Language Select Screen)

    2. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 30 menu languages. To select a menu language, follow these steps: 1.

  • Page 25: ❹ Selecting A Source

    2. Projecting an Image (Basic Operation) ❹ Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Detecting the Signal Automatically Press the SOURCE button once. The projector will search for the avail- able input source and display it.
  • Page 26 2. Projecting an Image (Basic Operation) Selecting Default Source You can so that it will be displayed each time the projector is turned on. 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button twice to select [SETUP] and the ▼ button or the ENTER button to select [GENERAL]. 3.

  • Page 27: ❺ Adjusting The Picture Size And Position

    2. Projecting an Image (Basic Operation) ❺ Adjusting the Picture Size and Position Use the lens shift dial, the adjustable tilt foot lever, the zoom lever/zoom ring and the focus ring to adjust the picture size and position. In this chapter drawings and cables are omitted for clarity. Adjusting the projected image’s vertical and horizontal Adjusting the focus [Focus ring] position [Lens shift]...

  • Page 28: Adjusting The Vertical Position Of A Projected Image (Lens Shift)

    2. Projecting an Image (Basic Operation) Adjusting the vertical position of a projected image (Lens shift) CAUTION Perform the adjustment from behind or from the side of the projector. Adjusting from the front could expose your eyes to strong light which could injure them. 1.
  • Page 29 2. Projecting an Image (Basic Operation) TIP: • The diagram below shows the lens shift adjustment range ([ORIENTATION]: [DESKTOP FRONT]). • For the lens shift adjustment range regarding the [CEILING FRONT] projection, see page 73. [6650HDA/6645HDA] 25%H 25%H Width of projected image...

  • Page 30: Focus

    2. Projecting an Image (Basic Operation) Focus Use the FOCUS ring to obtain the best focus. NOTE: • Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has been projected for over 30 minutes. Please refer page about the TEST PATTERN.

  • Page 31: Adjusting The Tilt (Tilt Foot)

    2. Projecting an Image (Basic Operation) Adjusting the tilt (Tilt foot) Adjusting the left and right tilt. 1. Turn the left and right tilt feet to adjust. The tilt feet lengthen and shorten when turned. The height of the projected image is adjusted by turning the left and right tilt feet.

  • Page 32: ❻ Correcting Keystone Distortion [Keystone]

    2. Projecting an Image (Basic Operation) ❻ Correcting Keystone Distortion [KEYSTONE] When the projector is not exactly perpendicular to the screen, keystone distortion occurs.To overcome it, you can use the “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp, square image. The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions.
  • Page 33 2. Projecting an Image (Basic Operation) 4. Press the ▲ button to select [HORIZONTAL] and then use the ◀ or ▶ so that the top and bottom sides of the projected image are parallel. • Adjust the horizontal keystone distortion. 5.

  • Page 34: ❼ Optimizing Computer Signal Automatically

    2. Projecting an Image (Basic Operation) ❼ Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. (COMPUTER) Press the AUTO ADJ. button to optimize a computer image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] NOTE:...

  • Page 35: ❾ Turning Off The Projector

    2. Projecting an Image (Basic Operation) ❾ Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The confirmation message will be displayed. •...

  • Page 36: ❿ When Moving The Projector

    2. Projecting an Image (Basic Operation) ❿ When Moving the Projector Preparation: Make sure that the projector is turned off. 1. If the separately sold cable cover is mounted, remove it. (→ page 132) 2. Unplug the power cord. 3. Disconnect any other cables. •...

  • Page 37: Convenient Features

    3. Convenient Features ❶ Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: • Even though the image is turned off, the menu still remains on the screen. ❷...

  • Page 38: ❸ Magnifying A Picture

    3. Convenient Features ❸ Magnifying a Picture You can enlarge the picture up to four times. NOTE: • The maximum magnification may be less than four times depending on the signal. To do so: 1. Press the D-ZOOM (+) button to magnify the picture. To move the magnified image, use the ▲,▼,◀...

  • Page 39: ❹ Changing Eco Mode/Checking Energy-Saving Effect

    3. Convenient Features ❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE] The ECO MODE (NORMAL and ECO) increases lamp life, while lowering power consumption and cutting down on emissions. Four brightness modes of the lamp can be selected: [OFF], [AUTO ECO], [NORMAL] and [ECO] modes. [ECO MODE] Description Status of LAMP indicator...

  • Page 40: Checking Energy-Saving Effect [Carbon Meter]

    3. Convenient Features Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO emission reduction (kg) when the projector’s [ECO MODE] is set. This feature is called as [CARBON METER]. There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON SAVINGS] message shows the total amount of CO emission reduction from the time of shipment up to now.

  • Page 41: ❺ Preventing The Unauthorized Use Of The Projector [Security]

    3. Convenient Features ❺ Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the pro- jector cannot project an image.
  • Page 42 3. Convenient Features 7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1.
  • Page 43 3. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The SECURITY KEYWORD screen will be displayed.

  • Page 44: ❻ Viewing 3D Images

    3. Convenient Features ❻ Viewing 3D Images The projector provides 3D images to a user wearing commercially available LCD shutter eyeglasses. CAUTION Health precautions Before viewing, be sure to read health care precautions that may be found in the user’s manual included with your LCD shutter eyeglasses or your 3D compatible content such as DVDs, video games, computer’s video files and the like.
  • Page 45 3. Convenient Features The [3D] menu will be displayed 4. Press the ▽ button to select a signal and press the ENTER button. The 3D (DETAIL SETTINGS) screen will be displayed. 5. Press the ▽ button to [GLASSES] and press the ENTER button. The [GLASSES] setting screen will be displayed.
  • Page 46 3. Convenient Features To view 3D images, see page 33. Select [HDMI1], [HDMI2], [COMPUTER], [VIDEO], or [HDBaseT]. NOTE: • The maximum distance for viewing 3D images is 10 m/394 inches from the screen surface under the following restrictions: - Brightness on the projector: 2000 lumens or greater - Screen gain: 1 - Viewing position: Facing straight towards the screen center - Outside light: None...

  • Page 47: Troubleshooting On Viewing 3D Images

    3. Convenient Features Troubleshooting on viewing 3D images If images will not be displayed in 3D or 3D images appear as 2D, check the following table. Also refer to the user’s manual accompanied with your 3D content or LCD shutter eyeglasses. Possible causes Solutions •...

  • Page 48: Using On-Screen Menu

    4. Using On-Screen Menu ❶ Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, ▲▼, ◀▶...

  • Page 49: Menu Elements

    4. Using On-Screen Menu Menu Elements Slide bar Solid triangle Available buttons Source Highlight Radio button Wireless symbol Menu mode ECO mode symbol Off Timer remaining time High Altitude symbol Thermometer symbol Key Lock symbol Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item�...

  • Page 50: ❷ List Of Menu Items

    4. Using On-Screen Menu ❷ List of Menu Items Some menu items are not available depending on the input source. The below listed menu items are on the advanced menu. The mark (B) is added to the items on the basic menu. Refer to pages about the APPS MENU.
  • Page 51 4. Using On-Screen Menu Menu Item Default Options SETUP MENU COLOR SELECT COLOR COLOR, MONOCHROME SOURCE DISPLAY OFF, ON ID DISPLAY OFF, ON ECO MESSAGE OFF, ON DISPLAY TIME AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC BACKGROUND BLUE BLUE, BLACK, LOGO...
  • Page 52 4. Using On-Screen Menu Menu Item Default Options INFO� USAGE TIME (B) LAMP LIFE REMAINING LAMP HOURS USED FILTER HOURS USED TOTAL CARBON SAVINGS TOTAL COST SAVINGS SOURCE(1) (B) RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY SYNC TYPE SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON VIDEO SYNC POLARITY SCAN TYPE...

  • Page 53: ❸ Menu Descriptions & Functions [Source]

    4. Using On-Screen Menu ❸ Menu Descriptions & Functions [SOURCE] HDMI1 and HDMI2 Selects the HDMI compatible equipment connected to your HDMI 1 IN or HDMI 2 IN terminal. COMPUTER Selects the computer connected to your COMPUTER input terminal signal. NOTE: When the component input signal is connected to the COMPUTER IN terminal, select [COMPUTER].

  • Page 54: ❹ Menu Descriptions & Functions [Adjust]

    4. Using On-Screen Menu ❹ Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are eight factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color.
  • Page 55 4. Using On-Screen Menu [DETAIL SETTINGS] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 8]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT ��������...
  • Page 56 4. Using On-Screen Menu [CONTRAST] Adjusts the intensity of the image according to the incoming signal. [BRIGHTNESS] Adjusts the brightness level or the back raster intensity. [SHARPNESS] Controls the detail of the image. [COLOR] Increases or decreases the color saturation level. [HUE] Varies the color level from +/−...

  • Page 57: [Image Options]

    4. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function adjusts the clock frequencies that eliminate the horizontal banding in the image�...
  • Page 58 4. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal.
  • Page 59 4. Using On-Screen Menu Selecting Aspect Ratio [ASPECT RATIO] The term “aspect ratio” refers to the ratio of width to height of a projected image. The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. •...
  • Page 60 Sample image when the appropriate aspect ratio is automatically determined [Computer signal] Aspect ratio of incoming signal 16:9 15:9 16:10 6650HDA/6645HDA Sample image when the appro- priate aspect ratio is automati- 6650WA/6645WA cally determined [Video signal] Aspect ratio of incoming signal...

  • Page 61: ❺ Menu Descriptions & Functions [Setup]

    4. Using On-Screen Menu ❺ Menu Descriptions & Functions [SETUP] [GENERAL] Correcting Keystone Distortion Manually [KEYSTONE] You can correct horizontal or vertical keystone manually. [HORIZONTAL] and [VERTICAL] (simultaneously adjustable) correction can be selected. NOTE: • Some items are not available when one item is activated. Unavailable items are shown in grey. •...
  • Page 62 4. Using On-Screen Menu Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. Setting various items related to lamp brightness [ECO SETTINGS] This option allows you to decrease the power consumption or to prolong the lamp life by controlling the lamp brightness. ECO MODE The ECO MODE increases lamp life, while lowering power consumption and cutting down on CO2 emissions.
  • Page 63 4. Using On-Screen Menu Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. OFF ������������������������ This exits the closed caption mode� CAPTION 1-4 ��������� Text is superimposed� TEXT 1-4 ����������������...

  • Page 64: [Menu]

    4. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as HDMI1, HDMI2, COMPUTER, VIDEO, HDBaseT, APPS, to be displayed on the top right of the screen.
  • Page 65 4. Using On-Screen Menu Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/black screen or logo when no signal is available. The default background is [BLUE]. NOTE: • When [SOURCE DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayed at the center of the screen regardless of its selection.

  • Page 66: [Installation]

    4. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function.
  • Page 67 4. Using On-Screen Menu Enabling Security [SECURITY] This feature turns on or off the SECURITY function. Unless the correct keyword is entered, the projector cannot project an image. (→ page 30) NOTE: Your setting will not be affected even when [RESET] is done from the menu. Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P).
  • Page 68 4. Using On-Screen Menu Setting ID to the Projector [CONTROL ID] You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control.
  • Page 69 4. Using On-Screen Menu Using Test Pattern [TEST PATTERN] Displays the test pattern for adjusting distortion on the screen and the focus at the time of the projector setup. Once the [TEST PATTERN] on the onscreen menu is selected, the pattern for adjustment will be displayed on. If you find distortion on the pattern, adjust the projector installation angle or correct distortion by pressing the KEYSTONE button on the remote.

  • Page 70: [Options(1)]

    4. Using On-Screen Menu [OPTIONS(1)] Selecting Fan Mode [FAN MODE] Fan Mode is used to set the speed of the internal cooling fan. AUTO ��������������������� The built-in fans automatically run at a variable speed according to the internal temperature� HIGH ���������������������� The built-in fans run at a high speed� HIGH ALTITUDE �����...
  • Page 71 4. Using On-Screen Menu Setting HDMI1, HDMI2, or HDBaseT [HDMI SETTINGS] Make the settings for each video level when connecting HDMI equipment and Ethernet/HDBaseT terminal. VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR- MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image contrast and increase detail in the dark areas�...

  • Page 72: [Options(2)]

    4. Using On-Screen Menu [OPTIONS(2)] Selecting Power-saving in [STANDBY MODE] The projector has two standby modes: [NORMAL] and [NETWORK STANDBY]. The NORMAL mode is the mode that allows you to put the projector in the power-saving condition which consumes less power than the NETWORK STANDBY mode. NORMAL �����������������������POWER indicator: Red light/STATUS indicator: Off When [NORMAL] is selected, only the following buttons and feature will work: POWER buttons on the projector cabinet and the remote control, powering on from PC Control com-...
  • Page 73 4. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON] When the projector is in Standby mode, applying a computer or HDMI signal from a computer connected to the COM- PUTER IN input, HDMI1, or HDMI2 input will power on the projector and simultaneously project the image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector.
  • Page 74 4. Using On-Screen Menu Selecting Default Source [DEFAULT SOURCE SELECT] You can set the projector to default to any one of its inputs each time the projector is turned on. LAST ���������������������� Sets the projector to default to the previous or last active input each time the projector is turned on� AUTO ���������������������...

  • Page 75: [3D]

    4. Using On-Screen Menu [3D] Selecting input connected to a source of 3D images [HDMI1/HDMI2/COMPUTER/VIDEO/HDBaseT] [3D] This function switches the 3D mode between ON and OFF for each input. ON ������������������������� Turns on the 3D mode for the selected input� NOTE: To confirm that the supported 3D signal is accepted, use either way of the following: •...
  • Page 76 4. Using On-Screen Menu [L/R INVERT] Change the setting if you have difficulty seeing 3D images. NON-INVERT ��������� Normal setting� INVERT ������������������ Changes the order of displaying the images for left eye and right eye� NOTE: • When [L/R INVERT] cannot be operated, the [L/R INVERT] screen will not be displayed even when the remote control’s video button is pressed.

  • Page 77: ❻ Menu Descriptions & Functions [Info.]

    4. Using On-Screen Menu ❻ Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage.This item has nine pages.The information included is as follows: TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H)

  • Page 78: [Source(1)]

    4. Using On-Screen Menu [SOURCE(1)] [RESOLUTION] [HORIZONTAL FREQUENCY] [VERTICAL FREQUENCY] [SYNC TYPE] [SYNC POLARITY] [SCAN TYPE] [SOURCE(2)] [SIGNAL TYPE] [VIDEO TYPE] [BIT DEPTH] [VIDEO LEVEL] [3D SIGNAL] [HDBaseT] [SIGNAL QUALITY] [OPERATION MODE] [LINK STATUS] [HDMI STATUS] [WIRED LAN] [IP ADDRESS] [SUBNET MASK] [GATEWAY] [MAC ADDRESS]...

  • Page 79: ❼ Menu Descriptions & Functions [Reset]

    4. Using On-Screen Menu ❼ Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [AS- PECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and [OVERSCAN].

  • Page 80: Installation And Connections

    The projection distance range at which focusing is possible is 0.79 m (for a 30 model) to 14.19 m (for a 300 model). Install within this range. [6650HDA/6645HDA] (inch) When zoom lever turned to wide...
  • Page 81 5. Installation and Connections [6650WA/6645WA] (inch) When zoom lever turned to wide When zoom lever turned to telescopic [Projection distance] With tilt feet tilted 4° when set to wide When zoom lever turned to wide When zoom lever turned to telescopic Screen center line (telescopic) Projector lens center...

  • Page 82: Tables Of Screen Sizes And Dimensions

    5. Installation and Connections Tables of screen sizes and dimensions [6650HDA/6645HDA] Size (inches) Screen width Screen height (inches) (cm) (inches) (cm) 66.4 37.4 Screen size Screen height 88.6 49.8 (diagonal) 110.7 62.3 132.8 74.7 177.1 99.6 221.4 124.5 265.7 149.4 Screen width 332.1...

  • Page 83: Example Of Installation On A Desktop

    The diagram below shows an example of when the projector is used on a desktop. Horizontal projection position: Equal distance to the left and right from the center of the lens Vertical projection position: (see table below) [6650HDA/6645HDA] Screen surface Lens center...

  • Page 84: Lens Shifting Range

    • In case lens shifted volume exceeds the below illustrated range, blur and shade may appear around ends of projected image. Legend: V “Vertical” refers to the screen height and H “Horizontal” refers to the screen width. The lens shift range is expressed as a ratio of height and width, respectively. [6650HDA/6645HDA] Lens shifting range: Vertical direction: +62%, −0% Horizontal direction: ±25%...
  • Page 85 Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is required. Contact your Dukane dealer if you need a mirror system. If you’re using a mirror system and your image is inverted, use the MENU and ▲▼◀▶...

  • Page 86: ❷ Making Connections

    5. Installation and Connections ❷ Making Connections Connecting Your Computer Computer cables and HDMI can be used to connect to a computer. The HDMI cable is not enclosed with the projector. Please get ready a suitable cable for the connection. NOTE: Signals supported by Plug &...
  • Page 87 5. Installation and Connections NOTE: The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher. NOTE: An image may not be displayed correctly when a Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting.

  • Page 88: Connecting An External Monitor

    5. Installation and Connections Connecting an External Monitor You can connect a separate, external monitor to your projector to simultaneously view on a monitor the computer analog image you’re projecting. MONITOR OUT (COMP.) AUDIO OUT Computer cable (VGA) (supplied) Computer cable (VGA) (not supplied) Stereo mini-plug audio cable (not supplied) NOTE: •...

  • Page 89: Connecting Your Dvd Player Or Other Av Equipment

    5. Installation and Connections Connecting Your DVD Player or Other AV Equipment Connecting Video Input VIDEO IN AUDIO IN Audio cable (not supplied) Video cable (not supplied) Audio equipment Audio cable (not supplied) • Select the source name for its appropriate input terminal after turning on the projector. SOURCE button on the projector Input terminal Button on the remote control...

  • Page 90: Connecting Component Input

    5. Installation and Connections Connecting Component Input Connection for component signal. Signal from the color difference signal output terminal on DVD players (DVD video output) and the YPbPr output terminal on the Hi-vision video can be projected. Recommend to connect the terminal for audio output on the DVD player to the audio components.

  • Page 91: Connecting Hdmi Input

    5. Installation and Connections Connecting HDMI Input You can connect the HDMI output of your DVD player, hard disk player, Blu-ray player, or notebook type PC to the HDMI IN terminal of your projector. HDMI 1 IN HDMI 2 IN HDMI cable (not supplied) Use High Speed HDMI Cable.

  • Page 92: Connecting Your Document Camera

    5. Installation and Connections Connecting your document camera You can connect your document camera and project printed documents, etc. VIDEO IN COMPUTER IN Name, position, and direction of terminals are vary depending on camera model. Please check user's manual of your camera for details. Computer cable (VGA) (supplied) Video cable (not supplied)

  • Page 93: Connecting To A Wired Lan

    5. Installation and Connections Connecting to a Wired LAN The projector comes standard with the Ethernet/HDBaseT port (RJ-45) and the LAN port which provide a LAN con- nection using a LAN cable. To use a LAN connection, you are required to set the wired LAN settings on the projector menu. Select [SETUP] → [INSTALLATION] →...

  • Page 94: Connecting To A Wireless Lan (Optional: Np05Lm Series)

    5. Installation and Connections Connecting to a Wireless LAN (Optional: NP05LM series) The USB Wireless LAN Unit also provides a wireless LAN connection. To use a wireless LAN connection, you are required to assign an IP address to the projector. Important: •...
  • Page 95 5. Installation and Connections 4. Mount the wireless LAN cover. (1)Insert the hook on the back of the cover into the groove in the projector and close the wireless LAN cover. Groove (2)Turn the screw clockwise to tighten it. Hook * To remove the USB Wireless LAN Unit, disconnect the power cord and use the above procedure.
  • Page 96 5. Installation and Connections Example of wireless LAN connection To use a LAN connection, you are required to set the Wireless LAN settings on the projector menu. Select [SETUP] → [INSTALLATION] → [NETWORK SETTINGS]. (→ page 58). The network settings can also be selected from the APPS menu. PC with wireless LAN card PC with built-in wireless inserted...

  • Page 97: Connecting To A Hdbaset Transmission Device (Sold Commercially)

    5. Installation and Connections Connecting to a HDBaseT transmission device (sold commercially) HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance. Use a LAN cable sold commercially to connect the Ethernet / HDBaseT port of the projector (RJ-45) to a HDBaseT transmission device sold commercially.
  • Page 98 5. Installation and Connections TIP: • With the projector’s Ethernet/HDBaseT port, remote control is not available when the projector is in the standby mode (serial communications is not available). (Remote control becomes available when the projector’s power is on). The 2 (two) methods below can be used to turn on the projector’s power when it is in standby mode.

  • Page 99: Apps Menu

    Note: The Dukane models described in this document are manufac- tured by NEC and use the same firmware, software programs, control code, and accessory parts. The equivalent Dukane to NEC models are 6645HDA (NP-P452H), 6645WA (NP-P452W), 6650HDA (NP-P502H), AND 6650WA (NP-P502W).
  • Page 100 Transmit Stop • Install the “image Express Utility Lite” from a download at the Dukane projector web site. • For a smartphone and a tablet, download the application “Wireless Image Utility” from our web site and install it on these. (→ page 112)
  • Page 101 6. APPS MENU WEB SERVER FUNCTION WEB SHARING Without using the exclusive software, it enables to share images and files among the projector and computers in the same network by accessing the web server of the projector utilizing the web browser. Sharing files IMAGE EXPRESS UTILITY LITE It enables to control screen splitting pattern and displaying position of the images that are simultaneously transmit-...
  • Page 102 6. APPS MENU TOOLS Set up for various features as the mouse, program timer, day and time, administrator mode and default APP. MOUSE A commercially available USB mouse can be used for operating the APPS MENU. Perform the set up for using it. PROGRAM TIMER Once day and time is set up, changing the projector’s condition in powering ON/standby, switching input signals, and switching ECO mode can be automatically performed.

  • Page 103: User Supportware

    • Image Express Utility Lite does not support “Meeting Mode” in Image Express Utility 2.0 supplied with our other models. Download Service and Operating Environment Please visit the Dukane or NEC web site to learn about operating environment and download service for each software: Visit URL: http://www.nec-display.com/dl/en/index.html...

  • Page 104: ❷ Projecting Your Computer's Screen Image From The Projector Over A Lan

    ❷ Projecting Your Computer’s Screen Image from the Projector over a LAN (Image Express Utility Lite) Using Image Express Utility Lite available on Dukane web site allows you to send the computer’s screen image to the projector over a wired or wireless LAN.
  • Page 105 If the message “There is not enough free space on destination” is displayed, free up enough space (about 100 MB) to install the program. Go to the Dukane or NEC website for the latest software. Visit: www.dukane.com/av/service/downloads.asp Or visit URL: http//www.nec-display.com/dl/en/index.html 1.
  • Page 106 7. User Supportware Step 2: Connect the projector to a LAN. Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 82) and “Con- necting to a Wireless LAN (Optional: NP05LM series)” (→ page 83). Step 3: Start Image Express Utility Lite.

  • Page 107: Starting Image Express Utility Lite From A Usb Memory Or Sd Card

    7. User Supportware TIP: Viewing the “Help” file of Image Express Utility Lite • Displaying the Help file of Image Express Utility Lite while it is running. Click the [?] (help) icon on the control window. The Help screen will be displayed. •...
  • Page 108 Using on Mac Step 1: Install Image Express Utility Lite for Mac on the computer Go to the Dukane or NEC website for the latest Mac software. Visit: www.dukaneav.com and go to the Service page for downloads and links. http://www.dukane.com/av/service/downloads.asp Or visit URL: http://www.nec-display.com/dl/en/index.html...

  • Page 109: ❸ Projecting An Image From An Angle

    7. User Supportware ❸ Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite) The Geometric Correction Tool (GCT) function allows you to correct distortion of images projected even from an angle. What you can do with GCT •...
  • Page 110 7. User Supportware 4. Click the “ ”(Projection) icon and then the “ ”(Exit) button. 5. Click “Yes”. 6. Start the Image Express Utility Lite again. 7. Click the “ ” (Picture) icon and then the “ ” button. The “4-point Correction” window will be displayed. 8.
  • Page 111 7. User Supportware 10.Drag the selected [ • ] mark to the point you wish to correct and drop it. • When you click somewhere within the project image area, the nearest [ • ] mark will go to the position where the mouse cur- sor is.

  • Page 112: ❹ Controlling The Projector Over A Lan (Pc Control Utility Pro 4/Pro 5)

    ❹ Controlling the Projector over a LAN (PC Control Utility Pro 4/ Pro 5) Using the utility software “PC Control Utility Pro 4” and “PC Control Utility Pro 5” available on the Dukane web site the projector can be controlled from a computer over a LAN.
  • Page 113 7. User Supportware Go to the Dukane or NEC website for the latest software. Visit www.dukaneav.com and go to the Service page for downloads and links. http://www.dukane.com/av/service/downloads.asp. Or visit URL: http://www.nec-display.com/dl/en/index.html Download – PC Control Utility Pro 4 Go to Next Review license Agreement.
  • Page 114 7. User Supportware Step 2: Connect the projector to a LAN. Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 82) and “Con- necting to a Wireless LAN (Optional: NP05LM series)” (→ page 83). Step 3: Start PC Control Utility Pro 4 Click “Start”...
  • Page 115 7. User Supportware Using on Mac Step 1: Install PC Control Utility Pro 5 on the computer 1. Go to the projector website at: Dukaneav.com. 2. Locate the projector model. 3. Locate the Mac OS X fdownloads. 4. Double-click “PC Control Utility Pro 5.pkg”. The installer will start.
  • Page 116 7. User Supportware TIP: Uninstalling a software program 1. Put the “PC Control Utility Pro 5” folder to the Trash icon. 2. Put the configuration file of PC Control Utility Pro 5 to the Trash icon. • The configuration file of PC Control Utility Pro 5 is located in “/Users/<your user name>/Application Data/NEC Projector User Supportware/PC Control Utility Pro 5”.

  • Page 117: ❺ Using The Computer Cable (Vga) To Operate The Projector (Virtual Remote Tool)

    ❺ Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool) Available on the Dukane website. This will help you perform operations such as projector’s power on or off and signal selection via the computer cable (VGA), serial cable, or LAN connection. Only via serial connection it is also used to send an image to the projector and register it as the logo data of the projector.
  • Page 118 • Exit all running programs before installing Virtual Remote Tool. If another program is running, the installation may not be com- pleted. 2. Go to the Dukane or NEC website for the latest Mac software. Visit: www.dukaneav.com and go to the Service page for downloads and links.
  • Page 119 7. User Supportware 3 Click “Next”. “END USER LICENSE AGREEMENT” screen will be displayed. Read “END USER LICENSE AGREEMENT” carefully. 4 If you agree, click “I accept the terms in the license agreement” and then click “Next”. • Follow the instructions on the installer screens to complete the installation. •...
  • Page 120 7. User Supportware TIP: Uninstalling Virtual Remote Tool Preparation: Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote Tool, the Windows user account must have “Administrator” privilege (Windows 8.1, Windows 8, Windows 7 and Windows Vista) or “Computer Administrator” privilege (Windows XP).
  • Page 121 7. User Supportware Step 3: Start Virtual Remote Tool Start using the shortcut icon • Double-click the shortcut icon on the Windows Desktop. Start from the Start menu • Click [Start] → [All Programs] or [Programs] → [NEC Projector User Supportware] → [Virtual Remote Tool] →...
  • Page 122 7. User Supportware Exiting Virtual Remote Tool 1 Click the Virtual Remote Tool icon on the Taskbar. The pop-up menu will be displayed. 2 Click “Exit”. The Virtual Remote Tool will be closed. Viewing the help file of Virtual Remote Tool •...

  • Page 123: (Wireless Image Utility)

    7. User Supportware ❻ Projecting photos or documents saved on the smartphone over a wireless LAN (Wireless Image Utility) Utilizing the Wireless Image Utility, it enables to transfer photos and documents saved on terminals as a smartphone or a tablet to the projector via the wireless LAN and project them. There are two kinds of Wireless Image Utility software one for Android and another for iOS that can be downloaded from Google Play or App Store.

  • Page 124: Maintenance

    8. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters, the projection window, the cabinet, and to replace the lamp and the filters. ❶ Cleaning the Filters Filters are fixed at two positions on this projector. Intake vent filter: At the bottom of control panel.
  • Page 125 8. Maintenance 1. Turn off the power supply and pull out the plug from the wall outlet. 2. Pinch the knob at the bottom of the filter case and pull it out. • If you put the projector upside down for cleaning as the illustra- tion, please lay a mat as a cloth for protecting the cabinet top from damage.
  • Page 126 8. Maintenance 5. Set the cleaned Filter (A) onto the filter case. Knob • Set the cut off part of the Filter (A) meeting with the knob part on the filter case. Cut off 6. Insert the filter case to the projector cabinet. Make sure that the filter case is inserted in the correct orientation.

  • Page 127: ❷ Cleaning The Lens

    8. Maintenance ❷ Cleaning the Lens • Turn off the projector before cleaning. • Do not scratch or mar the projection window as it is made of glass. • Use a blower or lens paper to clean the projection window, and be careful not to scratch or mar the glass surface. •...

  • Page 128: ❸ Cleaning The Cabinet

    8. Maintenance ❸ Cleaning the Cabinet Turn off the projector, and unplug the projector before cleaning. • Use a dry soft cloth to wipe dust off the cabinet. If heavily soiled, use a mild detergent. • Never use strong detergents or solvents such as alcohol or thinner. •...

  • Page 129: ❹ Replacing The Lamp And The Filters

    To order the replacement lamp, specify your lamp type. Replacement lamp: 456-6645WA: 6645WA/6645HDA 456-6650WA: 6650WA/6650HDA The replacement lamp comes with filters. Replace the lamp and the filters (A) (B) at the same time. • DO NOT REMOVE ANY SCREWS except one lamp cover screw and three lamp housing screws.You could receive an electric shock.
  • Page 130 8. Maintenance To replace the lamp and the Filter (B): 1. Remove the lamp cover. (1) Loosen the lamp cover screw • The lamp cover screw is not removable. (2) Push and slide the lamp cover off. 2. Pull out the filter case. Pinch the filter case handle and pull it in the arrow indicated direction.
  • Page 131 8. Maintenance (2) Vacuum off accumulated dust and dirt on inside and outside of the filter case. (3) Fix a new Filter (B) onto the filter case. 4. Remove the lamp housing. (1) Loosen the three screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition.
  • Page 132 8. Maintenance 5. Install a new lamp housing. (1)Insert a new lamp housing until the lamp housing is plugged into the socket. (2) Push the top center of the lamp housing to secure it. (3) Secure it in place with the three screws. •...
  • Page 133 8. Maintenance 7. Reattach the lamp cover. (1)Slide the lamp cover back until it snaps into place. (2) Tighten the screw to secure the lamp cover. • Be sure to tighten the screw. This completes the lamp and Filter (B) replacement. Go on to the Filter (A) replacement.
  • Page 134 8. Maintenance To replace the Filter (A): NOTE: • Before replacing the filters, wipe off dust and dirt from the projector cabinet. • The projector is precision equipment. Keep out dust and dirt during filter replacement. • Do not wash the filters with soap and water. Soap and water will damage the filter membrane. •...
  • Page 135 8. Maintenance 4. Fix a new Filter (A) onto the filter case. Knob • Set the cut off part of the Filter (A) meeting with the knob part on the filter case. Cut off 5. Insert the Filter case to the projector cabinet. Make sure that the filter case is inserted in the correct orientation.

  • Page 136: Appendix

    9. Appendix ❶ Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages POWER Indicator Indicator Condition Projector Condition Note The main power is off Without connecting the power cable� Blinking Blue 0�5 sec On, The projector is getting ready to turn on�...
  • Page 137 9. Appendix Over-Temperature Protection If the projector inside temperature gets too high, the lamp will be turned off automatically and the status indicator will start to blink (2-cycle On and Off). Should this happen, do the following: • Unplug the power cord after the cooling fans stop. •...

  • Page 138: Common Problems & Solutions

    9. Appendix Common Problems & Solutions (→ “POWER/STATUS/LAMP Indicator” on page 125.) Problem Check These Items Does not turn on • Check that the power cord is plugged in and that the power button on the projector cabinet or the remote or shut down control is on�...

  • Page 139: If There Is No Picture, Or The Picture Is Not Displayed Correctly

    9. Appendix Problem Check These Items Image is scrolling • Check the computer’s resolution and frequency. Make sure that the resolution you are trying to display is vertically, horizontally supported by the projector� (→ page 136) or both • Adjust the computer image manually with the [HORIZONTAL]/[VERTICAL] in the [IMAGE OPTIONS]. (→ page 47) Remote control does •...

  • Page 140: ❷ Specifications

    9. Appendix ❷ Specifications This section provides technical information about projector’s performance. 6650HDA 6650WA 6645HDA 6645WA Model name Method 1 Chip DLP type Specifications of main parts DMD panel Size 0.65" (aspect ratio: 0.65" (aspect ratio: 0.65" (aspect ratio: 0.65" (aspect ratio:...
  • Page 141 9. Appendix Model name 6650HDA 6650WA 6645HDA 6645WA HDBaseT Video input Deep Color (color depth): Support 8/10/12 bits Colorimetry: Support RGB, YCbCr444 and YCbCr422 Support LipSync , HDCP , 3D (*4) Audio input Sampling frequency: 32/44.1/48 kHz Sampling bit: 16/20/24 bit Remote terminal Stereo mini Jack ×...

  • Page 142: ❸ Cabinet Dimensions

    9. Appendix ❸ Cabinet Dimensions Unit: mm (inch) 362 (14.3) 91 (3.6) Lens center 5 (0.2) 175 (6.9) 200 (7.9)

  • Page 143: ❹ Attaching The Optional Cable Cover (Np09Cv)

    9. Appendix ❹ Attaching the Optional Cable Cover (NP09CV) After finishing connections, attach the supplied cable cover to properly hide the cables. CAUTION: • Be sure to tighten the screws after attaching the cable cover. Failure to do so may cause the cable cover to come off and fall, resulting in injury or damage to the cable cover.

  • Page 144: Removing The Cable Cover

    9. Appendix Removing the cable cover 1. Loosen the cable cover screws until the Phillips screw- driver goes into a freewheeling condition and remove the cover. • When suspended from the ceiling, hold so that the cable cover does not drop. •...

  • Page 145: ❺ Pin Assignments And Signal Names Of Main Terminals

    9. Appendix ❺ Pin assignments and signal names of main terminals COMPUTER IN Terminal (Mini D-Sub 15 Pin) Connection and signal level of each pin Pin No. RGB Signal (Analog) YCbCr Signal 11 12 13 14 15 Green or Sync on Green Blue Ground Ground...
  • Page 146 9. Appendix Ethernet/HDBaseT/LAN Port (RJ-45) Pin No. Signal TxD+/HDBT0+ 1 2 3 4 5 6 7 8 TxD−/HDBT0− RxD+/HDBT1+ Disconnection/HDBT2+ Disconnection/HDBT2− RxD−/HDBT1− Disconnection/HDBT3+ Disconnection/HDBT3− USB Port (Type A) Pin No. Signal D− Grounding PC CONTROL Port (D-Sub 9 Pin) Pin No. Signal Unused RxD reception data...

  • Page 147: ❻ Compatible Input Signal List

    23.98/24 720p 1280 × 16:9 50/59.94/60 *1 Native resolution on 1080p model (6650HDA/6645HDA) *4 WXGA MODE: OFF *2 Native resolution on WXGA model (6650WA/6645WA) *5 WXGA MODE: ON *3 The projector may fail to display these signals correctly when [AUTO] *6 120Hz signals are supported for Frame Sequential only.

  • Page 148: ❼ Pc Control Codes And Cable Connection

    9. Appendix ❼ PC Control Codes and Cable Connection PC Control Codes Function Code Data POWER ON POWER OFF INPUT SELECT COMPUTER INPUT SELECT HDMI1 INPUT SELECT HDMI2 INPUT SELECT VIDEO INPUT SELECT APPS INPUT SELECT HDBaseT PICTURE MUTE ON PICTURE MUTE OFF SOUND MUTE ON SOUND MUTE OFF...

  • Page 149: ❽ Update The Software

    9. Appendix ❽ Update the Software Using the web browser on a computer, download the updated software for the projector from our web site and install it on the projector by the wired LAN connection. NOTE: • The exclusive web browser enables to update the software is Internet Explorer 11. •...
  • Page 150 9. Appendix NOTE: • During the software update, pay attention to the follows: - Do not turn off the AC Power for the projector. - Do not reload or move the web page. - Do not close the web page. •...

  • Page 151: ❾ Troubleshooting Check List

    9. Appendix ❾ Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently.
  • Page 152 9. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Installation environment Model number: Screen size: inch Serial No�: Screen type: □ White matte □ Beads □ Polarization □...

  • Page 153: ❿ Register Your Projector

    9. Appendix ❿ REGISTER YOUR PROJECTOR! (for residents in the United States, Canada, and Mexico) Please register your projector. Go to the Dukane website. http://dukaneav.com/support.aspx DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com...
  • Page 154 DUKANE CORP AV SERVICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www.dukaneav.com 430-6645HDA-6645WA-6650HDA-6650WA-User Manual-00...

This manual is also suitable for:

6645hda6650wa6645wa

Table of Contents