Vertex Standard EVX-530 Series Operating Manual page 29

s ch u /d
( eVx-534 & eVx-539 )
peed p oWn
Press and hold the assigned PF key to cause the radio
to begin stepping (repeatedly) upward or downward
through the channels.
prI-1
( eVx-534 & eVx-539 )
Press, (or press and hold), the assigned PF key to re-
call the pre-programmed Priority Channel (Priority-1)
by your Vertex Standard dealer directly. The "P1"
will appear at the upper right corner on the display.
prI-2
( eVx-534 & eVx-539 )
Press, (or press and hold), the assigned PF key to
recall the pre-programmed Priority Channel of the
current group (Priority-2) by your Vertex Standard
dealer directly. When PRI-2 channel is recalled, the
"P" icon will appear on the display.
prI-2 s
( eVx-534 & eVx-539 )
et
Press, (or press and hold), the assigned PF key to
toggle the current channel to the priority channel 2
"enable" and "disable". When PRI-2 channel is re-
called, the "P" icon will be indicated on the display.
EVX-530 S O
EriES pErating
a o
dVanced peratIon
M
anual
prI-2 d
( eVx-534 & eVx-539 )
IsaBle
Press (or press and hold) the assigned PF key, the
display indicates "PRI2 DI" briefly, and disable the
priority channel 2 of the group temporarily.
Press again, (or press and hold again), the assigned
PF key, the display indicates "PRI2 EN" briefly, and
enabling the priority channel 2 of the group.
d ch 1 ch 4
Irect to
Press, (or press and hold), the assigned PF key to
recall the pre-programmed channel by your Vertex
Standard dealer directly.
d ch e
( eVx-534 & eVx-539 )
Irect ntry
You can call the desired channel directly using this
function:
r Press, (or press and hold), the assigned PF key.
A tone will sound, and the current group/channel
will appear on the display.
r In the EVX-534, select the desired digit of the
group number and channel number using the
[ A ] / [ B ] keys, then change the number using the
SIDE-1/SIDE-2 buttons.
In the EVX-539, enter the desired group number
( eVx-534 & eVx-539 )
27