Additional Programme; Settings; Drying Aim Ô; Stains - Siemens WN44A2X0GC Instruction Manual And Installation Instructions

Additional programme settings
en
\

Additional programme

settings

You can find possible additional
N ote:
A d d i t i o n a l p r o g r a m m e s e t t i n g s
programme settings in the overview;
these differ depending on the model.
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
Drying aim Ô
Touch Drying aim Ô to activate or
deactivate the drying function. Washing
and drying without interruption is
possible when the function is activated
(only for Optional drying
programmes).There are three drying
target mode can be selected as
desired:
» (Cupboard Dry): For single-layer
fabrics. Garments can be folded or
hung up in a cupboard. It is the
standard drying target mode. In this
mode the drying time is automatically
set according to the amount of laundry
to be dried.
¾ (Cupboard Dry+): For fabrics made
of thick, multilayered items of clothing,
which need to be dried longer.
Garments can be folded or hung up in a
cupboard. Laundry more dry than
Cupboard dry.
36
Ø (Iron Dry): For delicate laundry.
Fabrics suitable for ironing (iron fabrics
in order to avoid creasing). Garments
can be additionally hung up to dry.
The drying process would proceed
followed washing process when the
Drying aim Ô activated. If you only
need the individual drying progamme,
you can select Intensive dry, Gentle
dry or myTime Dry.
Notes
Do not exceed the maximum loads
■
for drying.
Overview of programmes
~ "Selectable programme"
on page 30
Maximum spin speed for
■
programme with drying phase will be
selected automatically to obtain a
good drying result.

Stains

Types of stain that can be selected:
Oil
Ì
Blood
ë
Juice
â
Grass
ì
Do not let stains dry. Remove solid
substances beforehand.
Select a programme with a stain type:
Arrange items of washing as usual.
1.
Select a programme.
2.
Select a stain type (depending on
3.
the selected programme).
Start the programme.
4.
The appliance adjusts the average
washing temperature, drum movement
and soaking time to the specific type of
stain. Hot or cold water, gentle or
intensive washing and long or short
soaking ensure that the wash
programme sequence is specially
adapted to each type of stain. This
makes sure that stains are treated in the
best possible way.