Table of Contents
Advertisement
Freehand Shaping
Freehand methods are one of the most dan-
gerous operations performed on a shaper.
Although this machine is capable of performing
freehand operations, we do not recommend that
you attempt to do so. If you MUST perform free-
hand operations, get formal training and read a
book that details freehand operations, their inher-
ent dangers, and ways to avoid those dangers!
-26-
Shaper Accessories
There are many accessories that can be built or
purchased to increase the safety of the operator.
Many experienced shaper users regularly use
proven shop-made fences and safety guards to
augment their shaping operations. In addition,
many production shops routinely use power feed-
ers with their shapers to streamline their opera-
tions.
Here are some basic accessories and their uses:
•
Zero Clearance Fence — A shop-made
fence with an opening only as large as the
cutter, so that only the part of the cutter
being used is exposed.
•
Box Fence — A shop-made box that com-
pletely surrounds the cutter. A one-piece
fence is attached that allows only the thick-
ness of the board to pass underneath, there-
by completely shielding the operator from
exposure to the spinning cutter. A clear plex-
iglass window on top of the box allows the
operator to view the workpiece during cut-
ting.
•
Power Feeder — A motorized unit that can
be clamped or permanently mounted to the
table of a shaper. A power feeder pulls the
workpiece through the cut, reducing the risk
of operator contact with the spinning cutter
and reducing any injuries due to kickback.
Because of the steady feed rate, power feed-
ers can also produce cleaner, more consis-
tent cuts. We highly recommend using a
power feeder with your shaper! Check the
current Grizzly catalog for available power
feeders.
Because of the wide range of fences and guards
that can be built in the shop, explaining their con-
struction is beyond the scope of this manual. We
strongly recommend that you read shaper books
magazines, or get formal training to learn more
about these.
G9862/G9968 Shaper
Advertisement
Table of Contents
