Echo CLS-5000 Operator's Manual page 29

GB
1 OPERATOR'S MANUAL - Included with unit. Read
before operation and keep for future reference to
learn proper, safe operating techniques.
2 ANGLE TRANSMISSION - Having two gears to
change the angle of rotating axis.
3 CUTTING ATTACHMENT - Clearing blade for sawing
heavy brush and small tree.
4 SHIELD - Device to protect the operator from
accidental contact with the cutting head and thrown
objects.
5 SHAFT TUBE - Part of the unit that provides a casing
for power transmission shaft.
6 U-HANDLE - Having the configuration of a bicycle
handle bar to reduce working effort compared to a
loop-handle.
7 THROTTLE TRIGGER - Activated by the operator's
finger for controlling the engine speed.
8 IGNITION SWITCH - "Slide Switch" mounted on top
of the Throttle Trigger Housing, move switch forward
to RUN, backward to STOP position.
9 THROTTLE TRIGGER LOCKOUT - Locks throttle
trigger in the idling position until you have a proper
grip with your right hand around the handle.
10 SUSPENSION POINT - Device on which the harness
can be hooked.
DESCRIPTION
11 SPARK PLUG
12 DECOMPRESSION DEVICE - Device for lowering
the compression in the cylinder, to aid starting.
13 SILENCER COVER - Cover the silencer not to make
operator touch to hot surface of silencer.
14 STARTER HANDLE - Pull handle to start the engine.
15 FUEL TANK CAP - For closing the fuel tank.
16 FUEL TANK - Contains fuel and fuel filter.
17 AIR CLEANER COVER - Covers air filter.
18 SHOULDER HARNESS - An adjustable straps to
suspend unit.
19 HIP PAD - To protect hip/leg and clothing.
20 BLADE COVER - When transporting the unit, use the
appropriate metal blade cover.
21 GUARD PLATE - Extention guard, used with nylon
line trimmer only.
22 CUT OFF KNIFE - Cut nylon line to adjust line length
to proper swath. Attach to guard plate used with nylon
line cutter.
23 SAFETY DECAL - Part number 890617-43130
29
(See page 28)
CLS-5000/5010
E
N
G
L
I
S
H
D
E
U
T
S
C
H
I
T
A
L
I
A
N
O