Belling BI602FPCT User Manual page 10

Table of Contents

Advertisement

Check, modify or cancel the cooking duration time
1. If you need to check or change the cooking duration time, press the function key repeatedly until
the cooking duration time symbol starts flashing again, and the remaining cooking duration time is
displayed.
2. While the cooking duration time symbol is flashing, press the plus and/or minus keys repeatedly to
adjust the cooking duration time.
3. Adjusting the cooking duration time down to zero would cancel the semi-automatic cooking
function.
4. About 7 seconds after the last press of the plus or minus key, the updated cooking duration time is
set and begins to count down.
When the cooking duration time has elapsed, the buzzer sounds and the 'Man' icon starts to flash.
1. Turn the function knob and the thermostat knob back to the off position.
2. Press the function key once to silence the buzzer. If you do not silence the buzzer, it will be silenced
automatically after about 7 minutes.
3. Press the function key again and the 'Man' symbol lights up steadily to show that the main oven is
back in manual mode.
Fully Automatic cooking
Fully-automatic cooking allows the main oven to switch on and off automatically. You can enter the
'cooking duration time' and the time at which you want the food to be ready, and the timer will calculate
the start time.
Note: Make sure that the correct time of day has been set on the timer.
1. Place food in the oven.
2. Press the function key repeatedly until the cooking duration time symbol
3. While the cooking duration time symbol is flashing, use the plus and/or minus keys to set the
required cooking duration time. A duration time of between 1 minute and 23 hours 59 minutes can
be set.
4. About 7 seconds after the last press of the plus or minus key, the cooking duration time is set. The
'Auto' symbol and 'cookpot' symbol light up in the timer display.
5. Press the function key repeatedly until the 'cooking end time' symbol
6. While the cooking end time symbol is flashing, use the plus and/or minus keys to set the required
cooking end time. A cooking end time can be selected up to 23 hours and 59 minutes after the
'current time of day'.
7. Select the cooking function and temperature as usual.
The 'Auto' symbol remains lit up, but the 'cookpot' symbol goes out, this indicates that the cooking start
time has not yet been reached.
Check, modify or cancel the cooking duration time
1. If you need to check, change or cancel the cooking duration time, press the function key repeatedly
until the cooking duration time symbol starts flashing again, and the cooking duration time is
displayed.
2. While the cooking duration time symbol is flashing, you can use the plus and/or minus keys to adjust
the cooking duration time.
10
starts to flash.
starts to flash.

Advertisement

Table of Contents
loading

Table of Contents