Panasonic KX-HDV130B Operating Instructions Manual page 46

Customizing the Telephone
[In standby mode]
1.
Menu
2. [D]/[C]: "Basic Settings" a
3. [D]/[C]: "Key Option" a
4. [D]/[C]: "Program Key" a
5. [D]/[C]: Select the key to change. a
6. [D]/[C]: Select the new item to assign. a
*1 This item is displayed only when the feature is enabled. Contact your administrator for further
information.
Block anonymous calls
This feature allows the unit to reject calls when the unit receives a call without phone number. The default
setting is "Off".
IMPORTANT
R We recommend setting with your administrator. Contact your administrator for further information.
R This feature is not available on shared lines.
1.
Menu
2. [D]/[C]: "Basic Settings" a
3. [D]/[C]: "Call Settings" a
4. [D]/[C]: "Block Anonymous" a
5. [D]/[C]: Select a desired line. a
6. [D]/[C]: "On"/"Off" a
Incoming call barring (Caller ID service users only)
This feature allows the unit to reject calls from specified phone numbers that you do not want to answer
such as junk calls.
When a call is received, the unit does not ring while the caller is being identified. If the phone number
matches an entry in the call barred list, the unit rejects the call.
Storing unwanted callers
You can store up to 30 phone numbers in the call barred list by using the caller list or by entering the
numbers directly.
1.
Menu
2. [D]/[C]: "Basic Settings" a
3. [D]/[C]: "Call Settings" a
4. [D]/[C]: "Block Caller ID" a
5. [D]/[C]: Select a blank line. a
6. [D]/[C]: "Edit" a
OK
7. Enter the phone number (32 digits max.). a
46
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Menu
OK