Belling BRD900DF User Manual page 61

CONNECT TO THE ELECTRICITY AND GAS SUPPLY
Electric and gas connection location (see illustration below)
The electric connection can be found on the rear of the appliance, 25.7cm from the bottom of the appli-
ance and 35cm from the right hand side of the appliance.
The gas inlet can be found on the rear of the appliance, 56.5cm from the bottom of the appliance and
3.2cm from the left hand side of the appliance.
Gas connector
point
3.2cm
to centre
Electrical cable
entry point
35.0cm