Table of Contents
Advertisement
Using the Cinema Colour
Management function(C.C.M)
You can adjust, save, and retrieve the settings for the selected colours of the
projected image based on the selected picture mode to suit your preference.
Press the F or G button to select an item, press
the I or H button to change the settings, and
press the ENTER button for confirmation.
Press the C.C.M button.
B The "COLOUR MANAGEMENT" menu will be
displayed.
PROFILE
B Retrieves the saved profile (colour settings which have been adjusted).
NORMAL
When projecting images according to the setting of "PICTURE
MODE" (page 33). This setting is the factory default setting.
USER1/2/3 These items are displayed only when "PROFILE SAVE" has
been carried out. Refer to page 39 for details.
NOTE:
B Refer to page 65 for the general arrangement of the "COLOUR
MANAGEMENT" menu.
B You can enter the "COLOUR MANAGEMENT" menu from the
"ADVANCED MENU" in the "PICTURE" menu (page 46).
B When the "PICTURE MODE" menu is selected, the settings will switch
automatically to the last "PROFILE" settings that were used for the
selected picture mode.
B When retrieving a profile, "CURSOR" and "PROFILE SAVE" will not be
displayed if the picture mode being selected does not match the picture
mode which had been selected when that profile was saved. (You can
only check the colour setting in the "LOG" menu.)
B "LOG" and "PROFILE SAVE" are displayed only when the colours have
been adjusted in "CURSOR" menu.
36-E
NGLISH
CURSOR
You can select a colour in the projected image, and adjust the colour settings.
Press the ENTER button to display the cursor ( B ).
# Select the colour you want to adjust with the cursor.
B Press the F, G, I and H buttons to move the cursor, and then press
the ENTER button.
B The selected colour ( C ) and the "CURSOR" menu ( A ) will be displayed.
$ Adjust the items in the "CURSOR" menu.
B The colour adjusted in the "CURSOR" menu ( D ) will be displayed.
COLOUR
Adjusts the deepness of the colour.
TINT
Adjusts the hue of the colour.
BRIGHT
Adjusts the brightness of the colour.
% Press the ENTER button to apply the adjusted colour.
B The letters PROCESSING and the progress status bar will be displayed
while the adjusted colour is applied.
B The adjusted colour settings will be saved in the "LOG" menu.
If you would like to continue to adjust another colour after adjusting a colour,
press the MENU button or the RETURN button on the remote control unit,
and then repeat the steps from step #.
A
B
˛
C
& Press the MENU button or the RETURN button on the remote control
unit twice, and then save the adjusted colour settings.
B Select the "PROFILE SAVE" menu from the "COLOUR
MANAGEMENT" menu. The adjusted colour settings will not be saved
until you carry out "PROFILE SAVE".
NOTE:
B The projected image will be paused when the cursor is displayed.
Press the MENU button or the RETURN button on the remote control
unit to cancel the still image. (If the "CURSOR" menu is displayed,
press the MENU button or the RETURN button twice.)
B When there are same or similar colours in the projected image, these
colours will also be changed.
D
˛
Screen
E
-37
NGLISH
Advertisement
Table of Contents
