Table of Contents
Advertisement
Connections
Notes on connections
B Read the instruction manual for each peripheral device carefully before connecting it.
B Turn off the power supply for all peripheral devices before making any connections.
B If the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
B Refer to the list on page 64 for details on compatible signals which can be
input to the projector.
B An audio system circuit is not provided with this projector. Connect the
audio output of the connected equipment to a separate audio system.
Connecting to video equipment
Computer for
control use
DVD player
To S-Video output
Serial adapter
(ET-ADSER : sold
separately)
DIN 8-pin (male)
To YP
P
output
B
R
DVD player
NOTE:
B When the device connected to SCART is turned on, the input select setting will
be switched to SCART automatically, and "ASPECT" (page30) will also be set
automatically. (When "WSS" is set to "ON", refer to page 49 for details.)
22-E
NGLISH
DVD player
SCART output
To Video output
Video deck
Connecting to equipment compatible with HDMI
Computer for
control use
Serial adapter (ET-ADSER :
sold separately)
DIN 8-pin (male)
HDMI cable (RP-CDHG30E-W:
sold separately)
To HDMI output
DVD player
NOTE:
B Be sure to use an HDMI cable which conforms to HDMI specifications.
If inappropriate cables are used, the connected equipment may not
operate correctly.
B This projector can be connected to HDMI and DVI equipment, but some
equipment may not operate correctly, for example images may not appear.
E
-23
NGLISH
Advertisement
Table of Contents
