Maintenance And Storage - Worx WG779E Safety And Operating Manual

the part which is away
from the operator;
m) do not put hands or feet
near or under rotating
parts. Keep clear of the
discharge opening at all
times;
n) not to touch the blades
before the disabling
device has been removed
and the blades have
come to a complete stop;
o) Do not start the
lawnmower when
standing in front of the
discharge opening.
p) Do not transport the
lawnmower while the
power source is running.
q) Stop the lawnmower,
and remove the disabling
4
device. Make sure that all
moving parts have come
to a complete stop.
– whenever leaving the
machine unattended,
– before clearing a
blockage,
– before checking, cleaning
or working on the
machine,
– after striking a foreign
object. Inspect the
machine for damage
and make repairs before
restarting and operating
the lawnmower
Cordless Lawn Mower
WG779E WG779E.X
If the lawnmower starts
to vibrate abnormally
(check immediately)
– inspect for damage.
– replace or repair any
damaged parts.
– check and tighten any
loose parts.
MAINTENANCE AND
STORAGE
a) Keep all nuts, bolts and
screws tight to be sure
the equipment is in safe
working condition;
b) Check the grass catcher
frequently for wear or
deterioration;
c) Replace worn or
damaged parts for
safety. Use only genuine
replacement parts and
accessories.
d) Be careful during
adjusting of the
lawnmower to prevent
entrapment of the fingers
between moving blades
and fixed parts of the
lawnmower.
e) Always allow the
lawwnmower to cool
down before storing.
f) When servicing the
blades be aware that,
even though the power
source is switched off, the