Table of Contents
Advertisement
Pre-heating
• After filling the bowl with the fat, close the lid and plug
in your fryer without the basket
• Adjust the thermostat - fig 7 depending on the food to
be fried (see cooking charts p. 10).
• Press the On/Off switch. The indicator will light up - fig 8.
• When the temperature indicator switches off, press
the lid unlock button to open the lid and allow the
steam to escape.
Never exceed the
maximum safety
limit – fresh products
1200 g, frozen 900 g.
To avoid overflow and
extend the life of the
oil, wipe the food
carefully before
cooking it.
Cooking
Lowering the basket
• After the temperature indicator light goes out place
the basket in the bowl.
• Lower the bowl gently into the oil - fig 10. Lowering it
too quickly could cause the fryer to overflow.
• If you use solid fat, chop it into pieces and then melt it
in a separate pan before pouring it into the bowl (never
melt solid fat in the basket or in the bowl).
• Never exceed 150°C to melt the fat that has solidified
in the bowl. For the cooking temperature follow the ins-
tructions (see cooking charts p.10).
• NEVER use animal fat such as lard or dripping as this
could cause overflow, smoke or a fire hazard.
• Dry the food to remove any excess water or ice.
• Fill the basket before placing it in the fryer.
• Do not overfill the basket.
• Reduce quantities for frozen food.
• Tip: Cut food to the same size so that it cooks evenly.
Avoid pieces that are too thick.
Place the fryer:
- on a secure surface
- out of the reach of
children
- away from any
sources of spatter or
heat.
Never plug the fryer in
when it is empty
(without any oil or fat)
- fig 9.
Loading the basket
EN
9
Advertisement
Table of Contents
