Brother TD-2120N TD-2130N TD-2120NW User Manual page 83

Using the Touch Panel Display (Optional:PA-TDU-001) (TD-2120N/2130N only)
e
Press [a] or [b] to select AM, PM or 24, and then press the number keys to specify two digits
each for the hour and minutes.
To enter 2:45 in the AM/PM format, press [b] to select [PM], and then press [c], then [0] [2]
[4] [5].
f
Press [OK]. The main screen appears, and the specified time and date are displayed.
NOTE
The format for the time and date can be changed. Press [
[Time&Date Form] from the parameters, and then specify settings for [Date Format] and
[Time Format].
Setting the Administrator Password
A password can be set so that basic settings specified by pressing [
be accessed. If a password is set, each time [
entered. Access to these parameters can be restricted by setting a password.
a
Press [ ] (admin key).
b
Press [b], select [Admin Password], and then press [OK].
c
Press [b], select [On], and then press [OK].
The password input screen appears.
d
Type in the 4-digit password, and then press [OK].
The password is set.
NOTE
• This parameter can be accessed only when touch panel A (basic control panel) is set.
• After a password has been set, the password input screen appears when [
pressed. Type in the specified 4-digit password, and then press [OK].
• To cancel the password settings, press [
parameters, and then set [Admin Password] to [Off].
• If you do not remember the password, use [Device settings] in the "Printer Setting Tool" to
return all settings to their factory defaults or specify the password again and apply it. For
details, see Device Settings on page 34.
] (admin key), select [Setup], then
] (admin key) is pressed, a password must be
] (admin key), type in the password to display the
] (admin key) cannot easily
] (admin key) is
10
10
77