Table of Contents
Advertisement
●
The power meter icon
NOTE:
settings on page
The computer takes the following actions for a critical battery level:
If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains briefly in
●
the Sleep state and then shuts down and loses any unsaved information.
If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates
●
Hibernation.
Resolving a low battery level
Resolving a low battery level when external power is available
Connect one of the following to the computer and to external power:
AC adapter
●
Optional docking or expansion device
●
Optional power adapter purchased as an accessory from HP
●
Resolving a low battery level when no power source is available
Save your work and shut down the computer.
Resolving a low battery level when the computer cannot exit Hibernation
1.
Connect the AC adapter to the computer and to external power.
2.
Exit Hibernation by pressing the power button.
Running on AC power
For information about connecting to AC power, refer to the Setup Instructions poster provided in the computer
box.
The computer does not use battery power when the computer is connected to AC power with an approved AC
adapter or an optional docking/expansion device.
WARNING!
replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP.
Connect the computer to AC power under any of the following conditions:
WARNING!
When charging or calibrating a battery
●
When installing or updating system software
●
When updating the system BIOS
●
When writing information to a disc (select products only)
●
34
Chapter 6 Managing power
shows a low or critical battery notification.
For additional information about the power meter, see
32.
To reduce potential safety issues, use only the AC adapter provided with the computer, a
Do not charge the computer battery while you are aboard aircraft.
Using the power meter and power
Advertisement
Table of Contents
