Table of Contents
Advertisement
When you start printing, the Alarm lamp and the Paper lamp indicating the paper size setting for printing
flashes in synchronization.
Select one of the operations below.
• Printing on the paper loaded on the rear tray
You print on the paper loaded without changing the paper size setting for printing. Press the RESUME
button.
For example, when the paper size setting for printing is KG and the paper size registered in the printer
is A4, the printer starts printing on the paper loaded on the rear tray without changing the paper size
setting for printing.
• Printing after replacing paper
You print after replacing paper loaded on the rear tray.
For example, when the paper size setting for printing is KG and the paper size registered in the printer
is A4, you load KG sized paper before you start printing.
After replacing the paper, register the size of the paper loaded on the rear tray in the printer.
• Cancel printing
Press the ON/Stop button to cancel printing and change the paper size setting for printing. Try
printing again.
Default Setting for Flashing Alarm Lamp which Prevents Misprinting
• When you print from the PictBridge (Wireless LAN) compliant device, the smartphone, or the
tablet:
The Alarm lamp flashing which prevents misprinting is enabled by default.
To change the setting:
◦ To enable the Alarm lamp flashing which prevents misprinting, press and hold RESUME button
and release it when Alarm lamp flashes 9 times.
◦ To disable the Alarm lamp flashing which prevents misprinting, press and hold RESUME button
and release it when Alarm lamp flashes 10 times.
200
Advertisement
Table of Contents
