Do you have a question about the PIXMA MG3660 and is the answer not in the manual?
Questions and answers
Любовь
March 13, 2025
Здравствуйте не могу настроить принтер на фото подскажите пожалуйста как сделать
1 comments:
Mr. Anderson
March 13, 2025
To set up the Canon PIXMA MG3660 printer for photo printing, follow these steps:
1. Unbox and Power On - Press the power button to turn on the printer.
2. Install Ink Cartridges - Open the front door and the ink cartridge chamber door. - Press the locks down on both sides, insert the black (240) and color (241) cartridges, then push the locks up. - Close the ink cartridge chamber door.
3. Load Photo Paper - Open the front cover. - Extend the paper support and output tray. - Load photo paper vertically with the print side facing down in the paper tray. - Align the paper guides to the paper width.
4. Select and Print Photos (Using My Image Garden) - Open the My Image Garden application. - Click the "Photo Print" icon. - Select the folder containing the photos. - Choose the photos you want to print. - Click "Print."
This completes the setup for photo printing.
This answer is automatically generated
Marie
June 2, 2025
How do i put short cut of MG3660 on my front page
John Engle
January 30, 2025
paper don't feed
1 comments:
Mr. Anderson
February 10, 2025
The Canon PIXMA MG3660 may not be feeding paper due to several possible reasons:
1. Incompatible Paper – The paper being used may be folded, curled, wrinkled, damp, too thin (less than 17 lb or 64 g/m²), too thick (more than 28 lb or 105 g/m², except Canon genuine paper), or not the correct size. 2. Incorrect Paper Orientation – Envelopes should be loaded in portrait orientation. If placed in landscape orientation, they will not feed properly. 3. Multiple Sheets Feeding at Once – If several sheets feed at once, enable the "Prevent paper double-feed" function: - From the operation panel: Press and hold the Stop button until the Alarm lamp flashes 12 times, then press the Color button. - From a computer: - Windows: Open the printer driver setup window, go to Maintenance → Custom Settings, check "Prevent paper double-feed," and click OK. - Mac OS: Open Canon IJ Printer Utility, go to Custom Settings, check "Prevent paper double-feed," and click Apply.
Checking and adjusting these factors may resolve the paper feeding issue.
Need help?
Do you have a question about the PIXMA MG3660 and is the answer not in the manual?
Questions and answers
Здравствуйте не могу настроить принтер на фото подскажите пожалуйста как сделать
To set up the Canon PIXMA MG3660 printer for photo printing, follow these steps:
1. Unbox and Power On
- Press the power button to turn on the printer.
2. Install Ink Cartridges
- Open the front door and the ink cartridge chamber door.
- Press the locks down on both sides, insert the black (240) and color (241) cartridges, then push the locks up.
- Close the ink cartridge chamber door.
3. Load Photo Paper
- Open the front cover.
- Extend the paper support and output tray.
- Load photo paper vertically with the print side facing down in the paper tray.
- Align the paper guides to the paper width.
4. Select and Print Photos (Using My Image Garden)
- Open the My Image Garden application.
- Click the "Photo Print" icon.
- Select the folder containing the photos.
- Choose the photos you want to print.
- Click "Print."
This completes the setup for photo printing.
This answer is automatically generated
How do i put short cut of MG3660 on my front page
paper don't feed
The Canon PIXMA MG3660 may not be feeding paper due to several possible reasons:
1. Incompatible Paper – The paper being used may be folded, curled, wrinkled, damp, too thin (less than 17 lb or 64 g/m²), too thick (more than 28 lb or 105 g/m², except Canon genuine paper), or not the correct size.
2. Incorrect Paper Orientation – Envelopes should be loaded in portrait orientation. If placed in landscape orientation, they will not feed properly.
3. Multiple Sheets Feeding at Once – If several sheets feed at once, enable the "Prevent paper double-feed" function:
- From the operation panel: Press and hold the Stop button until the Alarm lamp flashes 12 times, then press the Color button.
- From a computer:
- Windows: Open the printer driver setup window, go to Maintenance → Custom Settings, check "Prevent paper double-feed," and click OK.
- Mac OS: Open Canon IJ Printer Utility, go to Custom Settings, check "Prevent paper double-feed," and click Apply.
Checking and adjusting these factors may resolve the paper feeding issue.
This answer is automatically generated