Table of Contents
Advertisement
Quick Links
Installation Instructions
for Frontload Washers
Inside.....................................
Washer Dimensions...........................................................
Before You Start................................................................
Installation.........................................................................
Installer Checklist..............................................................
Para bajar una copia de estas instrucciones en español, visite www.speedqueen.com.
Keep these instructions for future reference.
(If this machine changes ownership, this manual must accompany machine.)
Date Purchased ________________
Model Number ________________
Serial Number _________________
www.speedqueen.com
2
2
3
Back Cover
Part No. 801988
August 2004
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alliance Laundry Systems CTS90AWN
Summary of Contents for Alliance Laundry Systems CTS90AWN
- Page 1 Installation Instructions for Frontload Washers Inside........Washer Dimensions............Before You Start..............Installation................. Installer Checklist.............. Back Cover Para bajar una copia de estas instrucciones en español, visite www.speedqueen.com. Keep these instructions for future reference. (If this machine changes ownership, this manual must accompany machine.) Date Purchased ________________ Model Number ________________ Serial Number _________________...
- Page 2 Water is used during testing at the manufacturer. Screwdriver Pliers NOTE: Install dryer before washer. This allows Socket Wrench room for attaching exhaust duct. Level Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801988...
- Page 3 Plain Rubber Washer material that could clog the screens in the water Hose Coupling mixing valve. Red Fill Hose Filter Screens Figure 3 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801988...
- Page 4 Refer to Figure 5. This will prevent the drain hose from dislodging from drain Figure 6 receptacle during use. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801988...
- Page 5 FLW2046N and one is holding the brace to the weight. Remove Wood Block shock sleeves by pulling on the yellow rope. Refer to Figure 10. Figure 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801988...
- Page 6 For leveling purposes, the washer may be tilted a Ground maximum of 6 inches (152.4 mm) in any direction. Neutral Side Round Grounding Prong Neutral Figure 12 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801988...
- Page 7 Refer to Installer Checklist on the back cover of this manual and make sure that washer is installed correctly. Run washer through one complete cycle to make sure it is operating properly. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 801988...
- Page 8 Installer Checklist Fast Track for Installing the Washer (Refer to the manual for more detailed information) • Position Washer Near • Remove the Shock Sleeves Installation Area. and Shipping Brace. CHECK FLW2048N CHECK FLW2048N Filter • Connect Fill • Wipe Out Inside of Screens Hoses.
Need help?
Do you have a question about the CTS90AWN and is the answer not in the manual?
Questions and answers