Terminal Panel Features - NEC PX750U2 User Manual

Terminal Panel Features

11
1. COMPUTER 1 IN/ Component Input Connector (Mini D-Sub 15 Pin) (→ page 14, 164, 169)
2. COMPUTER 2 IN / Component Input Connector (Mini D-Sub 15 Pin) (→ page 164, 169)
3. COMPUTER 3 IN/Component (R/Cr, G/Y, B/Cb, H, V) Connectors (BNC × 5) (→ page 164, 169)
4. HDMI IN Connector (Type A) (→ page 165, 166, 170)
5. DisplayPort IN Connector (DisplayPort 20P) (→ page 165)
6. MONITOR OUT (COMP 1) Connector (Mini D-Sub 15 Pin) (→ page 167)
7. VIDEO IN Connector (BNC) (→ page 168)
8. S-VIDEO IN Connector (Mini DIN 4 Pin) (→ page 168)
9. LAN Port (RJ-45) (→ page 171)
10. USB Port (Type A) (→ page 77)
11. PC CONTROL Port (D-Sub 9 Pin) (→ page 234)
Use this port to connect a PC or control system. This enables you to control the projector using serial communica-
tion protocol. If you are writing your own program, typical PC control codes are on page 234.
12. REMOTE Jack (Stereo Mini)
Use this jack for wired remote control of the projector using a commercially available remote cable with ⌀3.5 stereo
mini-plug (without resistance).
Connect the projector and the supplied remote control using a commercially available wired remote control cable.
(→ page 10)
13. USB (LAN) Port
14. Optional Slot (SLOT) (→ page 220)
9 4 5
13 12
(for optional Wireless LAN Unit) (→ page 172)
10 2 3 1
7
1. Introduction
7 8
14 6