Table of Contents
Advertisement
Reducing the Machine Noise
The silent function allows you to reduce the operating noise of this machine. Select when you wish to reduce
the operating noise of the printer at night, etc.
Using this function may lower the print speed.
The procedure for using the quiet mode is as follows:
Quiet Settings
1. Open the
printer driver setup window
2. Click Quiet Settings on the Maintenance tab
The Quiet Settings dialog box opens.
Note
• If the machine is off or if communication between the machine and the computer is disabled, an
error message may appear because the computer cannot collect the machine status.
3. Set the quiet mode
If necessary, specify one of the following items:
Do not use quiet mode
Select this option when you wish to use the machine with volume of normal operating noise.
Always use quiet mode
Select this option when you wish to reduce the operating noise of the machine.
Use quiet mode during specified hours
Select this option when you wish to reduce the operating noise of the machine during a specified
period of time.
Set the Start time and the End time of the quiet mode you wish to be activated. If both are set to
the same time, the quiet mode will not function.
Important
• You can set the quiet mode from the machine or the printer driver.
No matter how you use to set the quiet mode, the mode is applied when you perform
operations from the machine or printing from the computer.
• If you specify a time for Use quiet mode during specified hours, quiet mode is not applied
to operations (copy, direct print, etc.) performed directly from the machine.
4. Apply the settings
Make sure that the machine is on and click OK.
Click OK when the confirmation message appears.
The settings are enabled hereafter.
112
Advertisement
Table of Contents
