MUTOH XPJ-461UF Operation Manual page 85

Initial Settings 3: Remain Ink
Initial Settings3
Remain Ink
Initial Settings 4: IP Address
Initial Settings4
IP Address
Initial 5:Subnet Mask
Settings
Initial Settings5
Subnet Mask
Selects how the remaining ink amount will be displayed.
Setting values
Remain Ink ：
Off
Remain Ink ：
On
Sets the IP address of the printer.
• Use to increase a setting value.
• Use to decrease a setting value.
• Tap [Enter] to confirm your input for a value. The cursor will move on to the
next setting value.
• Confirm your input for each value.
Setting values
IP Address ：
192. 168. 1. 253
Sets the subnet mask of the printer.
• Use to increase a setting value.
• Use to decrease a setting value.
• Tap [Enter] to confirm your input for a value. The cursor will move on to the
next setting value.
• Confirm your input for each value.
Setting values
Subnet Mask ：
255. 255. 255. 0
Remaining ink icons will not be displayed.
Slot numbers and remaining ink will be
displayed in numerals.
Remaining ink icons will be displayed.
This is the default setting.
0.0.0.0 to <192.168.1.253> to
255.255.255.255
<> indicates the default setting.
0.0.0.0 to <255.255.255.0> to
255.255.255.255
<> indicates the default setting.
Set up3: Initial Settings 85