Sony HKCU2040 Operation Manual page 45

CCU CONFIGURATION menu
CCU
CONFIGURATION
Page name Item
Page No.
<COLOR BAR> 4K/HD-BAR
C01
SD-BAR
2SI DIA MARKER
Note
Displayed only when
HKCU2040 is
connected
BAR-CHARA
GRAY
MOVING SYMBOL
Settings
SEL BAR 16:9 (100%), BAR 16:9
(75%), SMPTE 16:9 (BLACK),
SMPTE 16:9 (–I/Q), BAR 4:3
(100%), BAR 4:3 (75%), SMPTE
4:3 (BLACK), SMPTE 4:3 (–I/Q),
MF-ARIB (75%), MF-ARIB (100%),
MF-ARIB (+I), MF-SMPTE (–I,Q),
MF-SMPTE (75%,Q), MF-SMPTE
(100%,Q), MF-SMPTE (+I,Q), HD-
CUSTOM, SDI CHECK FIELD, Y-
RAMP, Y/C-RAMP, HD-CUSTOM2
MF CB MODIFY, EVEN
SLOPE WIDE, NARROW
For NTSC: SMPTE, EIA, FULL,
95%, NTSC100%, Y/C-RAMP, Y-
RAMP
For PAL: SMPTE, EIA, EBU, 95%,
PAL100%, Y/C-RAMP, Y-RAMP
DSB, ENB
OFF, ON
ON, OFF
ON, OFF
ON, OFF
TYPE 0, 1, 2
SIZE SMALL, LARGE
Description
Sets an HD output color bar.
Sets a multi-format color bar.
Sets the chroma band for a color bar.
Sets SD output for a color bar.
DSB: Down convert and display the HD color bar.
ENB: Display the set SD color bar.
Sets diamond mark superposition on the color bar
for 4K 2 sample interleave output.
See "4K 2SI diamond marks" (page 46).
Turns the signal for characters superimposed on a
color bar ON/OFF.
ON: Gray screen output when camera power supply
is off.
OFF: Color bar signal output when camera power
supply is off.
Turns the moving symbol superimposed on the color
bar ON/OFF.
Sets the symbol type.
Sets the symbol size.
45