Site Considerations; Exhaust Fan - Grizzly G0533 Owner's Manual

Site Considerations

Floor Load
Refer to the Machine Data Sheet for the weight
and footprint specifications of your machine.
Some floors may require additional reinforcement
to support both the machine and operator.
Working Clearances
Consider existing and future needs, size of mate-
rial to be processed through each machine, and
space for auxiliary stands, work tables or other
machinery when establishing a location for your
new machine. Make a note of the exhaust fan
location. (See Safety on Page 8.) See Figure 3
for the minimum working clearances.
63"
3 . Minimum working clearances (top
Figure
view).
Unsupervised children and
visitors inside your shop
could cause serious per-
sonal injury to themselves.
Lock all entrances to the
shop when you are away and
DO NOT allow unsupervised
children or visitors in your
shop at any time!
G0533 3HP Dry Spray Booth
Components and Hardware Needed:
Exhaust Fan Housing .........................................1
Hex Bolts
Flat Washers
Inlet Gasket ........................................................1
To install the exhaust fan housing:
1.
Place the inlet gasket over the exhaust fan
inlet.
2. With the help of two strong assistants, or
using a hoist, place the exhaust fan housing
52"
over the inlet gasket.
3.
Rotate the exhaust fan housing so the outlet
port is aimed toward the back of the spray
booth.
4.
Align the gasket and exhaust fan mounting
holes, and fasten with eight
bolts and flat washers as shown in Figure 4.
Figure 4. Installing exhaust fan onto spray

Exhaust Fan

⁄ "-18 x 1" .........................................8
5
16
⁄ " ................................................8
5
16
The exhaust fan is very
heavy. You MUST have
assistance when mov-
ing, lifting or mounting
the exhaust fan onto the
spray booth.
booth.
Qty
⁄ "-18 x 1" hex
5
16
-13-