Outlet; Support Bar; Curtains - Grizzly G0533 Owner's Manual

Outlet

Components and Hardware Needed:
Outlet ..................................................................1
Hex Bolts "-18 x 1" ....................................... 10
5 ⁄
16
Flat Washers ⁄ " ..............................................20
5
16
Hex Nuts "-18 ...............................................10
⁄
5
16
Outlet Gasket .....................................................1
To install the exhaust fan outlet:
1.
Place the outlet gasket and outlet over the
exhaust fan, and secure with (10)
hex bolts, 20 flat washers, and 10 hex nuts
as shown in Figure 5.
Figure 5. Installing outlet.

Support Bar

Components and Hardware Needed:
Support Bar ........................................................1
Flat Head Screws ⁄ "-20 x
1
4
Flat Washers ⁄ " .................................................4
1
4
Hex Nuts ⁄ "-20 ..................................................4
1
4
To install the support bar:
1. Place the support bar between the lower right
and left edges of the spray booth (Figure 6),
and fasten each side with two
head screws, two flat washers, and two hex
nuts.
-14-
Qty
⁄ "-18 x 1"
5
16
Qty
⁄ " ............................4
5
8
⁄ "-20 x ⁄ " flat
1 5
4 8
Figure 6. Support bar installed.

Curtains

Components and Hardware Needed:
Curtain (Left, Top, Right) ....................................3
Connector Bars ..................................................2
Curtain Braces (Left and Right) .........................2
Flat Washers ⁄ " .................................................8
1
4
Hex Nuts ⁄ "-20 ..................................................8
1
4
Flat Head Screws ⁄ "-20 x
1
4
Hex Bolts ⁄ "-18 x ⁄ " ........................................8
5 3
16 4
To install the curtains:
1. Fasten the hinges (Figure 7) of the left cur-
tain to the front left side of the spray booth,
each with two ⁄ "-20 x
1
4
flat washers and hex nuts.
Figure 7. Installing left curtain.
G0533 3HP Dry Spray Booth
Support Bar
Qty
⁄ " ............................8
5
8
⁄ " flat head screws,
5
8