Table of Contents
Advertisement
User's manual_ADT Revise
Page 44 of 59
(no server) is typically used in home and small office networking.
1. From the "Network Authentication" drop-down menu, select "WPA-PSK (no
server)".
2. Enter your network key. This can be from eight to 63 characters and can be
letters, numbers, or symbols. This same key must be used on all of the clients
(network cards) that you want to include in your wireless network.
[insert UCUI-EditInfo-Adv.tif– use the same screenshot]
3. Click "Save" to finish. You must now set all clients (network cards) to match
these settings.
Advertisement
Table of Contents
