Table of Contents
Advertisement
User's manual_ADT Revise
Page 41 of 59
64-Bit WEP Encryption
1. Select "WEP" from the "Data Encryption" drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key by typing in
the hex key manually.
A hex (hexadecimal) key is a combination of numbers and letters from A–F and
0–9. For 64-bit WEP, you must enter 10 hex keys.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
[insert UCUI-Connect2aSecureNetwork-Adv.tif]
[Add AF0F4BC3D4 to the Encryption key box]
– use the same screenshot
Advertisement
Table of Contents
