Table of Contents
Advertisement
User's manual_ADT Revise
Page 37 of 59
3. Advanced Configuration Method: For manual connection to a secured
network.
WPS uses WPA2 (described below) for encryption. It does not provide additional
security. Instead, it standardizes the method for securing your wireless network.
On your client utility, WPS-enabled networks are denoted with the key icon. You
may use either the PBC method or PIN method to allow a device access to your
wireless network. The two methods work as follows:
PBC: Push and hold the WPS button located on the back of your router for three
seconds. Then, initiate the WPS procedure on the client utility within two minutes.
Select the network name in the utility and click "Connect". Your client will
automatically exchange the security information and be added to your wireless
network. The PBC method can also be initiated from the client device.
You will see the following message if the procedure is initiated from the router:
Advertisement
Table of Contents
