Table of Contents
Advertisement
User's manual_ADT Revise
Page 42 of 59
3. Click "Save" to finish. Encryption in the wireless router (or access point) is now
set. Each of your computers on your wireless network will now must be
configured with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings in
your wireless router (or access point), you will temporarily lose your wireless
connection until you activate security on your wireless client. Please record the
key prior to applying changes in the wireless router (or access point). If you don't
remember the hex key, your client will be locked out of the wireless router (or
access point).
128-Bit WEP Encryption
1. Select "WEP" from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key by typing in
the hex key manually. A hex (hexadecimal) key is a combination of numbers and
letters from A–F and 0–9. For 128-bit WEP, you must enter 26 hex keys.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
[insert UCUI-EditInfo-Adv.tif]
[Change encryption key to C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7]
Advertisement
Table of Contents
