Table of Contents
Advertisement
Changing the end time
You can change the time at which you wish your dish to be
ready. The appliance starts automatically and is ready at the
desired time. You can, for example, put your dish in the
cooking compartment in the morning and set the cooking time
so that it is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
For some programmes it is not possible to change the end
time.
In the Steam
operating mode, the cooking time does not
é
start counting down until the heating-up time has finished. The
selected end time is delayed by the length of the heating-up
time.
Example in the picture:
it is 10:30, the dish will take 45 minutes to cook but should be
ready at 12:30.
Prerequisites:
An operating mode and temperature have been set.
Press the
button repeatedly until the arrow is in front of the
0
1.
Cooking time
.
Nx
Use the
or
button to set the cooking time.
@
A
2.
Press the
0
button.
3.
The arrow
is in front of
N
dish will be ready is displayed.
Use the
button to delay the end time.
@
4.
Automatic programmes
You can prepare food really easily with 20 different
programmes.
In this section, you will find out
how to set one of the automatic programmes
■
hints and tips on the programmes
■
which programmes you can set
■
Setting a programme
Select the appropriate programme from the programme table.
Follow the instructions for the programmes.
(End time). The time when the
y
Press the
|
button.
J
"
5.
The appliance switches to standby. The End time
shown in the display. The cooking operation starts at the
appropriate time. The cooking time starts counting down in
the display.
Changing the end time
Use the
or
button to change the end time. If the timer has
@
A
been set, first press the
0
in front of the End time
Ny
After a few seconds, the change is adopted. Do not change the
end time if the cooking time has already started to count down.
The cooking result would no longer be correct.
The cooking time has elapsed
An audible signal sounds. The appliance stops heating. Press
the
0
button to stop the audible signal. To switch off the
appliance, turn the operating mode and temperature selectors
back to
Û
. Open the appliance door carefully. Hot steam will
escape.
Cancelling the end time
Use the
button to set the end time back to the current time. If
A
the timer has been set, first press the
the arrow is in front of the End time
After a few seconds, the change is adopted. The selected
cooking time starts counting down straight away.
Setting the clock
Example:
change the clock from summer time to winter time.
No other time-setting option should be set.
Press the
button repeatedly until the
0
1.
of the clock.
Use the
or
button to set the clock.
@
A
2.
After a few seconds, the time which has been set is applied.
After a power cut
After a power cut, the
0
and
display. Press the
0
button. Use the
clock. After a few seconds, the time which has been set is
applied.
Hiding the clock
You can hide the clock. It is then only visible when the
appliance is in operation (see section: Basic settings).
Turn the operating mode selector to
1.
The first programme
˜‚
Use the
or
button to set the programme.
@
A
2.
Ny
button repeatedly until the arrow is
.
button repeatedly until
0
.
Ny
arrow is in front
N0
‹
:
‹‹
symbols light up in the
@
or
A
button to set the
.
X
appears in the display panel.
is
11
Advertisement
Table of Contents
