Table of Contents
Advertisement
Massage
Controlling massage
The HC40 FRAME™ Advanced can control up to two massage references. The two standard options are
called "MASSAGE BACK" and "MASSAGE LEG".
Loop in the menu to find the massage screens. From the massage screen it is possible to:
• Set a timer
• Change massage mode
• Turn on/off the massage
• Adjust intensity
Setting a timer
1. Press button 1 "TIMER" to set a timer for the duration of the massage session.
2. Use 'up' and 'down' buttons to adjust the minutes.
3. Press button 3 "SAVE" to save the duration and start the massage.
Note: If the timer in the HC40 is set to a higher number than what is configured in the actuator system as timer, the massage
will stop according to the configuration in the actuator system.
Page 23 of 40
Advertisement
Table of Contents
Need help?
Do you have a question about the Homeline HC40BL and is the answer not in the manual?
Questions and answers