Data Label Information - American Dryer AD-202 Installation Manual

STANDARD LABEL
When contacting American Dryer Corporation, certain
information is required to ensure proper service/parts
information from ADC. This information is on the data
label that is affixed to the left side panel area behind the top
control (access) door. When contacting ADC, please have
the model number as well as the serial number readily
available.
1. MODEL NUMBER – Describes the size of the dryer and
the type of heat (gas, electric, or steam).
2. SERIAL NUMBER – Allows the manufacturer to gather
information on your particular dryer.
3. TYPE OF HEAT – This describes the type of heat for
your particular dryer, gas (either natural gas or liquid
propane [L.P.] gas), electric, or steam.
4. HEAT INPUT (for GAS DRYERS) – This describes the
heat input in British thermal units per hour (Btu/hr).
5. ORIFICE SIZE (for GAS DRYERS) – Gives the number
drill size used.
6. ELECTRIC SERVICE – This describes the electric
service for your particular model.
7. GAS MANIFOLD PRESSURE (for GAS DRYERS) – This
describes the manifold pressure taken at the gas valve
tap.
48
SECTION VII

DATA LABEL INFORMATION

American Dryer Corp.
CE LABEL
AGA LABEL
113289 - 10