Table of Contents
Advertisement
Quick Links
X
e
Hi-Speed Surface-Mounted ADA Compliant Hand
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or service the
product described. Protect yourself and others by observing all safety information. Failure to comply with instructions
could result in personal injury and/or property damage. Retain instructions for future reference.
WWW.RESTROOMDIRECT.COM
treme
All "AXT" Series
704 • 937• 2673
A
ADA
ir
American Dryer, LLC.
5700 McDermott Drive
Berkeley, IL 60163 U.S.A.
Telephone: (734) 421-2400
Fax: (734) 421-5580
www.americandryer.com
1
Email: sales@americandryer.com
129 Oakpark Dr., Unit A, Mooresville, NC 28115
AXT68
Revised DECEMBER 2016
Advertisement
Table of Contents
Related Manuals for American Dryer eXtremeAir ADA AXT Series
Summary of Contents for American Dryer eXtremeAir ADA AXT Series
- Page 1 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or service the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage. Retain instructions for future reference. American Dryer, LLC. 5700 McDermott Drive Berkeley, IL 60163 U.S.A.
-
Page 2: Electrical Specifications
WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Description Warm air hand dryer is a surface-mounted ADA (American Disabilities Act) compliant dryer powered by a universal brushed motor, and delivers up to 950 watts of drying power. These models operate at all voltages 115 – 230VAC, incorporate an integrated heating element, blower speed control and infrared sensor for automatic activation. -
Page 3: Installation
WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Unpacking 1. Remove all packing material. Recycling is recommended. 2. Carefully remove the hand dryer from the shipping carton, using care not to drop the appliance. 3. Inspect carefully for any damage that may have occurred during transit. Check for any loose, missing or damaged parts. -
Page 4: Adjusting Blower Speed
WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Adjusting Blower Speed These models include adjustable blower speed control for (2) levels of operation – Hi, and Low. The switch is located on the printed circuit board inside the dryer as shown in Fig. 1 below. Note: The factory setting for the blower speed control is “Hi”. -
Page 5: Parts List
WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Parts List ™ Repair Parts List For treme Hand Dryer All kits include fasteners needed for installation.Part Number for Cover Assy. (Reference Number 7) varies with model number for hand dryer. -
Page 6: Maintenance And Cleaning Instructions
WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Maintenance and Cleaning Instructions IMPORTANT: The dryer may collect lint and debris that is naturally present in the air. Excessive build up of lint and debris can damage the motor and heating element. The dryer should be cleaned on a routine schedule to maintain the dryer in good operating condition With light to moderate wash room traffic, cleaning once a year is recommended. - Page 7 WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Coarse Particulate Filter (for models not including HEPA filters) The dryer has a coarse particulate air filter to prevent lint and debris build up that can damage the motor and heating element.
-
Page 8: Troubleshooting Chart
WWW.RESTROOMDIRECT.COM 704 • 937• 2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115 Troubleshooting Chart Incoming Power Supply Remove cover and check diagnostic LEDS. If no LED’s are lit, check power supply at the circuit breaker / fuse. Defective PCB If no LED’s are lit above and supply circuit is con- firmed to be active, replace PCB and transformer.