Table of Contents
Advertisement
11. Enable Web Server Access on WAN
This option is to enable Web Server Access function on WAN.
12. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to clear all the
input data.
5.1.1.6
WAN Access Type – PPTP
If you have applied for a PPTP connection type from ISP, please follow the steps to set up
your WAN connection.\
1.
IP Address
Input your IP Address supplied by ISP. If you don't know, please check with your ISP.
2.
Subnet Mask
Input Subnet Mask, normally it is 255.255.255.0.
3.
Server IP Address
Input your Server IP Address supplied by ISP. If you don't know, please check with your ISP.
4.
User Name
Input the PPTP Account supplied by ISP, for example. If you don't know, please check with
your ISP.
5.
Password
Input the Password supplied by ISP.
6.
MTU Size
MTU stands for Maximum Transmission Unit. For PPPoE connection, the default MTU should
be provided by computer operating systems (OS). Advanced users can set the MTU
manually for increasing the internet performance. The largest number allowed is 1460 byte
7.
Request MPPE Encryption
Microsoft Point-to-Point Encryption (MPPE) encrypts data in Point-to-Point Protocol
38
Advertisement
Table of Contents
