Wan Access Type - Pppoe; Wan Access Type - Pptp; Wireless Setup - E-TOP BR280n User Manual

N+ high power broadband router - all broadbands

Table of Contents

Choose Dynamic IP to obtain IP address information automatically from your ISP. Select this

option if your ISP does not give you any IP numbers to use. This option is commonly used for

Cable modem services.

Click on Next button to go on next setting page.

4.2.3.5

WAN Access Type – PPPoE

This option is typically used for DSL services. Choose PPPoE (Point to Point Protocol over

Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and

password.

Click on Next button to go on next setting page.

4.2.3.6

WAN Access Type – PPTP

This option is typically used for DSL services. Some DSL service providers supply a special

DSL modem. This kind of modem only supports the PPTP tunnel to access the Internet, you

should create a PPTP tunnel that carries a PPP session and terminates on the DSL model.

Once the tunnel has been established, this kind of DSL modem will forward the PPP session

to the ISP. As long as the PPP session is connected, all the local users will be able to share

this PPP session to access to the Internet.

Click on Next button to go on next setting page.

4.2.3.7

First step is to name your SSID, and the default value is Download Server Router. Please

follow the illustrations below to proceed.

Table of Contents