Table of Contents
Advertisement
5.1.1.2
WAN Interface– Wireless
If you are connecting the internet via wireless, please select Wireless and its associated
settings will show up underneath at the same time.
You can see a list of available Wireless networks. Select you preferred one to connect and
the Encryption type form the drop-down list.
5.1.1.3
WAN Access Type – Static IP
If you applied for a Static IP connection type from ISP, please follow the steps to set up your
WAN connection.
1.
IP Address
Input your IP Address supplied by ISP. If you don't know, please check with your ISP.
2.
Subnet Mask
Input Subnet Mask, normally it is 255.255.255.0.
3.
Default Gateway
Input ISP Default Gateway Address. If you don't know, please check with your ISP.
4.
MTU Size
MTU stands for Maximum Transmission Unit. For Static IP connection, the default MTU
should be provided by computer operating systems (OS). Advanced users can set the MTU
manually for increasing the internet performance. The largest number allowed by Ethernet at
the network layer is 1500 byte
5.
DNS
If ISP provides you DNS information, please select Attain DNS automatically, otherwise
select Set DNS Manually and input the DNS information into the blank.
6.
Clone MAC Address
Copy the MAC address from the device you had registered to your ISP if your ISP asks for
34
Advertisement
Table of Contents
