Table of Contents
Advertisement
OPERATING INSTRUCTIONS
Status Indicator Lights
The console lights provide information about
the cycle selection and current status. During
operation, while the door is closed, these
lights will remain on. At the completion of
the cycle, the clean light will come on. The
sanitization light will also come on if that
option was selected and sanitization was
achieved during the wash cycle.
Status Window
The STATUS window, available on some
models, indicates the following activity:
1H-24H.............
MINUTES..........
CLOSE DOOR....
Overlay
6
Number of delay start
hours. The last hour
will count down in
minutes.
Number of minutes
left in cycle (1-199).
Close door will scroll
one time in the status
window.
In the unlikely event that the dishwasher
malfunctions, displays the error code "Uo",
or gives poor performance you can call the
Frigidaire Customer Care Center at
1-800-944-9044. They will be able to
provide assistance in troubleshooting the
problem and/or locating an authorized service
technician, if needed.
Console Lights
If it is desired to have the console lights
remain off while running, perform the following
operation: Prior to starting a cycle, press
and hold POWER PLUS and RINSE ONLY
simultaneously for approximately 8 seconds
until the corresponding lights flash. This
will turn the console lights off during cycle
operation. Simply repeat this operation to
revert back to the previous setting.
Advertisement
Table of Contents
