Connecting To A Network Wirelessly; Selecting A Wireless Network Connection Method - Yamaha AVENTAGE RXA780BL Owner's Manual

Connecting to a network wirelessly

Selecting a wireless network connection method

Select a wireless connection method according to your network environment.
NOTE
▪ You need to configure the network settings if your router does not support DHCP or if you want to
configure the network parameters manually. For details, see the following:
– "Setting the network parameters manually" (p.132)
▪ When the unit is added to a MusicCast network, the network settings can be configured at the same time.
If you use MusicCast, this method is recommended. For details, see the following:
– "Adding the unit to the MusicCast network" (p.48)
Internet
Modem
Mobile device
(such as iPhone)
Wireless router
The unit
173
1
Press z (receiver power) to turn on the unit.
2
Turn on the TV and switch the TV input to display video from the
unit (HDMI OUT jack).
3
Press SETUP.
4
Use the cursor keys to select "Network" and press ENTER.
5
Use the cursor keys to select "Network Connection" and press
ENTER.
6
Use the cursor keys to select "Wireless(Wi-Fi)" and press ENTER.
7
Use the cursor keys to select "OK" and press ENTER.
The following connection methods are available.
• "Setting up a wireless connection using the WPS button" (p.174)
• "Setting up a wireless connection using an iOS device" (p.174)
• "Setting up a wireless connection by selecting from the list of available access
points" (p.176)
• "Setting up a wireless connection manually" (p.177)
• "Setting up a wireless connection by using the WPS PIN code" (p.179)
En