Setting The Use Of Presence Speakers And Their Size; Setting The Layout Of The Presence Speakers; Setting The Crossover Frequency Of The Low-Frequency Components - Yamaha AVENTAGE RXA780BL Owner's Manual

Setting the use of presence speakers and their size

Selects the setting according to the use and size of your presence speakers.
Setup menu
"Speaker" > "Configuration" > "Front Presence"
Settings
Select this option for small speakers.
Small
The subwoofer or front speakers will produce presence channel low-
frequency components (configurable in "Crossover").
Select this option for large speakers.
Large
The presence speakers will produce all of the presence channel
frequency components.
Select this option when no presence speakers are connected.
None
The front speakers will produce presence channel audio.
NOTE
When configuring the speaker size, as a general guideline, select "Large" if the woofer diameter of your
speaker is 16 cm (6.1/4") or larger, or "Small" if it is smaller than 16 cm (6.1/4").

Setting the layout of the presence speakers

Selects a presence layout when presence speakers are used. This setting facilitates
the optimization of the sound field effect.
Setup menu
"Speaker" > "Configuration" > "Front Presence" > "Layout"
Settings
Front Height Select this option when presence speakers are installed on the front wall.
Overhead Select this option when presence speakers are installed to the ceiling.
Select this option when using the Dolby Enabled speakers as the
Dolby Enabled SP
presence speakers.
NOTE
▪ This setting is not available when "Front Presence" is set to "None". For details on "Front Presence" in the
"Setup" menu, see the following:
– "Setting the use of presence speakers and their size" (p.112)
▪ For details on the layouts of the presence speakers, see the following:
– "Presence speaker layout" (p.182)
Setting the crossover frequency of the low-frequency
components
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to "Small". A frequency sound lower than the specified value
will be produced from the subwoofer or front speakers.
Setup menu
"Speaker" > "Configuration" > (speaker) > "Crossover"
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
NOTE
If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
112
En