Setting The Zone2 Initial Volume For When The Unit Is Turned On; Adjusting The Time Deviation In Relation To The Main Zone; Switching Between Stereo And Monaural For Zone2 Output - Yamaha AVENTAGE RXA780BL Owner's Manual

Setting the Zone2 initial volume for when the unit is
turned on
Sets the Zone2 initial volume for when the unit is turned on.
Setup menu
"Multi Zone" > "Zone2" > "Initial Volume"
Settings
Sets the level at the volume level of the unit when it last
Off
entered standby mode.
Mute Sets the unit to mute the audio output.
-80.0 dB to +10.0 dB
On (0.5 dB increments)
Sets the level to the specified volume level.
[0.5 to 90.5 (0.5
increments)]
NOTE
▪ This setting is not available when "Volume" is set to "Fixed". For details, see the following:
– "Setting the use of volume adjustments for Zone2 output" (p.137)
▪ This setting works only when the volume level is set lower than "Max Volume" in "Zone2". For details, see
the following:
– "Setting the Zone2 limit value of the volume" (p.137)
▪ For details on the scale of the volume display (dB unit or numeric value), see the following:
– "Setting the scale of the volume display" (p.146)
Adjusting the time deviation in relation to the main
zone
Adjusts the time deviation in relation to the main zone.
Setup menu
"Multi Zone" > "Zone2" > "Audio Delay"
Setting range
0 ms to 100 ms (1 ms increments)
Switching between stereo and monaural for Zone2
output
Switches between stereo and monaural for Zone2 output.
Setup menu
"Multi Zone" > "Zone2" > "Monaural"
Settings
Off Produces stereo sounds in Zone2.
On Produces monaural sounds in Zone2.
138
En