Table of Contents
Advertisement
Setting the use of Center Spread
Selects whether to spread the center channel signals to left and right when a 2-
channel source is played. This setting is effective when "bDsur" is selected.
Setup menu
"Sound" > "Surround Decoder" > "Center Spread"
Settings
Off
Disables Center Spread.
On
Enables Center Spread.
NOTE
▪ If you feel the center sound is too strong, set this function to "On".
▪ For details on the surround decoder, see the following:
– "Selecting the surround decoder used in the program" (p.122)
Adjusting the center localization (broadening effect)
of the front sound field
Adjusts the center localization (broadening effect) of the front sound field. Adjust this
higher to strengthen the center localization (less broadening effect) or lower to weaken
it (more broadening effect). This setting is effective when "Neo:6 Music" is selected.
Setup menu
"Sound" > "Surround Decoder" > "Center Image"
Setting range
0.0 to 1.0
NOTE
For details on the surround decoder, see the following:
▪ "Selecting the surround decoder used in the program" (p.122)
Adjusting the entire volume for "7ch Stereo"
Adjusts the entire volume. This setting is effective when "7ch Stereo" is selected.
Setup menu
"Sound" > "7ch Stereo" > "Level"
Setting range
-5 to +5
Adjusting the front and rear volume balance for "7ch
Stereo"
Adjusts the front and rear volume balance. Higher to enhance the front side, and lower
to enhance the rear side. This setting is effective when "7ch Stereo" is selected.
Setup menu
"Sound" > "7ch Stereo" > "Front / Rear Balance"
Setting range
-5 to +5
Adjusting the left and right volume balance for "7ch
Stereo"
Adjusts the left and right volume balance. Higher to enhance the right side, and lower
to enhance the left side. This setting is effective when "7ch Stereo" is selected.
Setup menu
"Sound" > "7ch Stereo" > "Left / Right Balance"
Setting range
-5 to +5
123
En
Advertisement
Table of Contents
