Setting The Use Of A Subwoofer; Setting The Phase Of The Subwoofer; Setting The Distance Between Each Speaker And The Listening Position; Adjusting The Volume Of Each Speaker - Yamaha AVENTAGE RXA780BL Owner's Manual

Setting the use of a subwoofer

Selects the setting according to the use of your subwoofer.
Setup menu
"Speaker" > "Configuration" > "Subwoofer"
Settings
Select this option when a subwoofer is connected.
Use
The subwoofer will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Select this option when no subwoofer is connected.
None
The front speakers will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.

Setting the phase of the subwoofer

Sets the phase of the subwoofer. When the bass sound is lacking or unclear, switch
the subwoofer phase.
Setup menu
"Speaker" > "Configuration" > "Subwoofer" > "Phase"
Settings
Normal Does not reverse the subwoofer phase.
Reverse Reverses the subwoofer phase.
NOTE
This setting is not available when "Subwoofer" is set to "None". For details on "Subwoofer" in the "Setup"
menu, see the following:
▪ "Setting the use of a subwoofer" (p.113)
Setting the distance between each speaker and the
listening position
Sets the distance between each speaker and the listening position so that sounds from
the speakers reach the listening position at the same time.
Setup menu
"Speaker" > "Distance"
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L, Presence R, Subwoofer
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), 0.05 m (0.2 ft) increments
NOTE
Select the unit of distance from "Meter" or "Feet" in "Unit".

Adjusting the volume of each speaker

Adjusts the volume of each speaker to suit your listening position.
Setup menu
"Speaker" > "Level"
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Presence L, Presence R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
NOTE
Test tone output helps you to adjust the speaker balance while confirming its effect. For details, see the
following:
▪ "Outputting test tones" (p.115)
113
En