Configuring The Sound Settings; Checking The Current Audio Signal Information; Enabling Lipsync Adjustment - Yamaha AVENTAGE RXA780BL Owner's Manual

Configuring the sound settings

Checking the current audio signal information

Displays information about the current audio signal.
Setup menu
"Sound" > "Information"
Format Audio format of the input signal
The number of source channels in the input signal (front/
surround/LFE)
For example, "5.1 (3/2/0.1)" means 5.1ch in total (3 front
channels, 2 surround channels, and LFE).
Channel
Input
(When DTS:X content is played back)
For example, "7.1.4" denotes "standard 7.1-channel plus
4 for overhead speaker channels".
The number of samples per second of the input digital
Sampling
signal
The dialogue normalization level of the input bitstream
Dialogue
signal
The number of signal output channels (for example,
"5.1.2" denotes "standard 5.1-channel plus 2 for overhead
Output Channel
speaker channels") and the speaker terminals from which
signals are output
NOTE
▪ Even when the unit is set to output bitstream signals directly, the signal may be converted depending on
the specifications and settings of the playback device.
▪ Use the left/right cursor keys to display other informations in the "Setup" menu.

Enabling Lipsync adjustment

Enables/disables the "Lipsync" adjustment configured in "Auto/Manual Select" in the
"Setup" menu.
NOTE
For details on "Auto/Manual Select" in the "Setup" menu, see the following:
▪ "Setting the adjustment method of the Lipsync function" (p.117)
Setup menu
"Sound" > "Lipsync" > "Delay Enable"
Settings
Disable Disables the "Lipsync" adjustment.
Enable Enables the "Lipsync" adjustment.
NOTE
This setting is applied separately to each input source.
116
En