Table of Contents
Advertisement
5.6 Profile States Page
PrOFLE
StAtES
OFF
ON
ProGrM
1
rS–OFF
or
rS–run
or
rS–Hld
or
rS–End
rESEt
YES
YES
ProFLE
StAtES
NO (if program running)
NO
(if program
not running)
SEG xx
SKIP–F
SKIP–F
SKIP–N
SKIP–b
SKIP–b
SKIP–F
SKIP–N
Page Header – Profile States
The
key can be programmed to jump to this frame (
ADVANCED CONFIGURATION LEVEL
automatically to the first frame of the
Program Select
Select the program to be run (1 to 10).
10
1
Profile Status (Ramp Soak)
rUN
rS–OFF
/
rS–rUN
/
rS–Hld
HOLd
rUN
rS–HLd
/
Note. If a digital input is assigned to the run/hold function, the user is prevented from
overriding the digital signal.
Profile Reset
If the profile is running and
YES
program and continues to run.
NO
Note. To end a program, select
then select
of the selected program.
Skip Segment
The segment number (or
SKIP–F
SKIP–N
SKIP–b
For multiple skip operations, the last selection (For b) is displayed for 3 seconds
before reverting to
). If the key is used, the display reverts
Operating Page
ON
– (Ramp Soak Run/Off) select
Press the
key to activate.
HOLd
– (Ramp Soak Run/Hold) select
at current level.
Press the
key to activate.
– (Ramp Soak Hold) program is in the hold state, either as a result
of an operator hold, the controller is in manual or the holdback
facility (guaranteed ramp/soak). Select run to continue running
the profile if operator has stopped program. Press the
to activate.
ENd
– (Run/Hold End) the profile is completed, and the digital input
assigned to the profile function is still in the 'Run' state. This
frame is only displayed if a digital input is used to run and hold
the profile.
YES
is selected, the profile returns to the beginning of the
HOLd
YES
at this frame. The local set point value takes the value of the first level
End
) is shown in the upper display.
(skip forward) – abandon current segment and start next segment.
(do not skip) – maintain control using current segment.
(skip back) – return to beginning of current segment.
SKIP–N
.
5 CONTROL OPERATION...
Set Up Function Keys Page
when leaving this page.
rUN
to start selected program.
HOLd
to stop selected program
at the Profile Status frame (see above) and
,
key
19
Advertisement
Table of Contents
